Delta-Q IC650 On-Board 36V Battery Charger With COMM Port - 940-0005 

The Delta-Q IC650 is a 650 watt industrial battery charger designed with a rugged die cast aluminum enclosure (sealed to IP66 standards) for high reliability and long life. It is designed for either on or off-board applications.

It can store up to 25 charge algorithm profiles and comes pre-programmed with 17 for lead acid, wet, AGM and GEL batteries. Switching pre-loaded algorithms is easy on the machine. Additional algorithms can be added with a USB flash drive. 

It has a unique battery deep discharge recovery mode and will charge when the voltage is as low as 1.8 volts per cell. Many other chargers will not charge if the batteries get too low.

Note: This model includes the COMM port, providing full CAN bus control and other signals available.

Features include:
  • 36 Volts
  • 18.1 Amps maximum, 650 W
  • Deep discharge recovery mode minimum voltage 1.8 volts
  • For Lead acid (Wet/AGM/Gel) *
  • AC input voltage - 120 VAC / 270 VAC at 50/60 Hz
  • AC input connector US IEC320/C14 (requires country specific cord)
  • DC output connector M6 threaded fasteners for ring terminals
  • Multicolor LED for AC & Battery status (<80% / >80% / completion), Charging, Alarm, Fault
  • Stores up to 25 user-­selectable charge algorithms, comes with 17
  • Dimensions: 9.9" x 7.3" x 3.1"
  • Weight: 6.5 lbs
  • Two Year Warranty
Battery Types:  Please choose your battery type from the drop-down list above.  However, if your battery is not found on the said list, select "other" at the bottom of the list and inform us your battery type and model number upon checkout.  You may also call or email to us this information shortly after checkout.

No Cords Included:  See our other auctions for IC650 AC & DC cords. The unit is modular for different applications and does not come with AC or DC cords.

*These are not recommend for Lithium batteries and we do not support or program for Lithium.



----  --  --  ----  RETURNS  ----  --  --  ----

You must contact us by email for a Return Merchandise Authorization (RMA) number prior to returning an item to the manufacturer or to us. This RMA number must be clearly marked on the label attached to the shipping box. Packages without an RMA number will be refused and returned to the shipper. Warranty items returned with no fault found will be sent back to the customer at the customer’s cost, otherwise, a replacement will be sent. 

----  --  --  ----  REFUNDS  ----  --  --  ----

If you purchased by mistake and would like to return an item for a refund, a 10% restocking fee will apply for uninstalled parts and 30% for parts that have been installed that are tested functional. Shipping costs are non-refundable. 

----  --  --  ----  WARRANTY  ----  --  -- ----

Motors, motor controllers and battery chargers are covered by the manufacturer’s warranty. You can contact us for warranty issues and we will provide information on the return of your product to the manufacturer. All the rest of the products we sell are warranteed free of most defects for a period of 1 year from our customer’s date of purchase unless otherwise specified in the listing. EV Drives will not be liable for any cost of service calls, installation, alleged harm, both personal and materially and/or any other damages resulting from the installation of these parts.