Jewellery - Epoxy / Polyester Resin Mould, Plastic Polishing Machine Kits

A bench grinder and metal polishing kit which when assembled (see below) is an ideal bench mounted kit for polishing resins and plastics

Kit Contents
1 x Silverline or Draper 6" 150W Bench Grinder - Supplied as either Silverline or Draper depending on our stock levels. They are similar machines, just a different colour.

This compact bench grinder with dust-protected switch and rubber mounting feet is ideal for home or small workshop use. With two all-steel tool rests, large eye-shields and wheel guards provide safety and security whilst grinding.
150 Watts - As this is a low powered motor - 
Do not apply excessive pressure to the mops when polishing as this may strain the motor. Damage to the motor caused by excessive pressure being applied, will not be covered by any warranty or return. Light pressure and the correct polishing procedures and not excessive pressure gets good results. Run Time - Approx. 10 minutes with 10 minutes cool down.
230 Volts
No load speed 2950 rpm
Supplied Fitted With 2 Abrasive Wheels (coarse and fine) - Polishing kit assembly - see below
Electric Plug - Fitted with a 3 pin UK Plug. An adapter for use in other countries is not supplied and international buyers need to fit their own plug / adapter

Dimensions
Length (with spindle adapters attached) - 420 mm
Height (to top of motor) - 150 mm
Height (to top of the detachable safety guard sides) - 190 mm

The Polishing Kit is supplied separately to the Bench Grinder and needs to be assembled / attached by the following method. 

Spindle Adapter Fitting

Once the bench grinder side guards and the grinding wheels have been removed (please note that the left hand grinder shaft has a left hand nut), the mop spindle adapters are then slid over the grinder shafts. There is a right hand and a left hand spindle adapter in the kit. Please remove the grub screws in the adapters first and then fit the adapters as far as they will go onto the shaft. Once fitted, reinsert the grub screws (one in each adapter) and tighten them using the allen key.

Warranty - 
* Silverline - The bench grinder (not the other accessories) comes with a
 3 Year Warranty / Guarantee. T
he buyer must register the bench grinder online direct with the manufacturer within 30 days of purchase for the 3 year warranty to be valid. If not registered then a standard 30 day warranty is only offered
. Warranty claims within 30 days of purchase are made with us. After 30 days of purchase then warranty claims must be made direct with the manufacturer. Warranty Claims are subject to their Terms and Conditions as shown on their website.
* Draper - 
The bench grinder (not the other accessories) comes with a 1 Year Warranty / Guarantee. Warranty claims within 30 days of purchase are made with us. After 30 days of purchase then warranty claims must be made direct with Draper. Details can be viewed in their supplied bench grinder manual.

Comes supplied fitted with:
1 x Medium grade grinding wheel.
1 x Fine grade grinding wheel.

The Polishing Kit is supplied separately to the Bench Grinder and needs to be assembled / attached by the following method. 

Spindle Adapter / Flexi Drive Shaft Fitting
Once the bench grinder side guards and the grinding wheels have been removed (please note that the left hand grinder shaft has a left hand nut), the mop / flexi drive spindle adapters are then slid over the grinder shafts. There is a right hand and a left hand spindle adapter in the kit. Loosen the grub screws in the adapters first and then fit the adapters as far as they will go onto the bench grinder shaft. Once fitted, tighten the grub screws (one in each adapter) using the allen key.

The flexidrive shaft (supplied with the Deluxe Version) only fits to the right hand side of the bench grinder. It will not work if fitted to the left.

* Safety - Please note. The bench grinder eye guards and tool rests are used when using the pre-fitted abrasive wheels. When the polishing add-on kit is used then safety glasses / goggles (not supplied) must be used as the machine eye guards do not fit over the polishing mops.


The Standard Polishing Kit Also Includes
2 x  Bench Grinder Spindle Adapters (left and right)
1 x 3" x 1/2" Loose Fold Cotton Polishing Mop.
1 x 4" x 1/2" Loose Fold Cotton Polishing Mop.
1 x 4" x 1" Soft Swansdown Cotton Polishing Mop.

1 x Glosswax 16 Menzerna Compound (Beige) 130gm bar (For 1st stage polishing)
1 x P175 Super Finishing Compound (Yellow) 150gm bar (For final stage polishing - can also be used on gold / silver)
1 x 40ml bottle of Final Polish for hand use
1 x Micro Fibre Cloth

The Deluxe Polishing Kit Also Includes 
1 x Flexible Drive Shaft (Fits on the right)
* 36
" (915mm) total length.
* 6mm drive shaft.
* Fitted with a 0-6mm chuck.
There are two grease nipples in the shaft that need to be regularly greased (grease not supplied). Failing to regularly grease will cause wear to the rotating internal shaft resulting in breakage. 
* Steel strain relief springs. 
1 x Flexidrive Shaft Adapter
2 x  Bench Grinder Spindle Adapters (left and right)

1 x 3" x 1/2" Loose Fold Cotton Polishing Mop.
1 x 4" x 1/2" Loose Fold Cotton Polishing Mop.
1 x 4" x 1" Soft Swansdown Cotton Polishing Mop.
1 x 38mm Diameter Cylinder Cotton Polishing Mop. 
1 x 60mm Diameter Dome Cotton Polishing Mop.
2 x Felt Bobs (6mm shafts)
1 x 3" Soft Cotton Buffing Mounted Wheel (6mm shaft)
1 x Glosswax 16 Menzerna Compound (Beige) 130gm bar (For 1st stage polishing)
1 x P175 Super Finishing Compound (Yellow) 150gm bar (For final stage polishing - can also be used on gold / silver)
1 x 40ml bottle of Final Polish for hand use
1 x Micro Fibre Cloth.


*** Please - Do Not, over bend or pull the shaft to tight as this will damage the flexible drive shaft. Damage caused by this will not be covered by warranty. Due to the nature of how these shafts are used there is only a 30 day warranty / guarantee offered from the date of purchase.

Jewellery Metal Polishing - other suitable polishing compound bars and polishing mops which can be used with this kit can be purchased seperately from our eBay Shop if required.


Please kindly browse through our Ebay Shop as we can offer you our valued customer an assortment of other very useful products eg

* Different dimensions and thicknesses of foam pads
* Polisher backer / backing pads
* Polishing compounds for glass, plastics and metals
* Polishing kits (glass, plastics and metals)
* And a host of other very useful items


Please Kindly Read The Notes Below Before Making Your Purchase



UK Shipping

UK Areas and Post Codes Where Free Shipping Is Not Offered.  Please contact us for shipping rates.
- Northern Ireland
- Isle Of Man
- Isle Of Wight
- Channel Islands
- And the following Scotland Post Codes
AB31 to AB38
AB40 to AB56
HS
IV1 to IV28
IV30 to IV32
IV36 to IV40
IV41 to IV49
IV51, IV55 & IV56
IV52 to IV54
IV63
KA27 and KA28
KW1 to KW14
KW17 to KW17
PA20
PA41 to PA49
PA21 to PA38
PA60 to PA78
PH4 to PH41
PH41 to PH42
PH49 to PH50
ZE


Large Parcels
We send by overnight carrier and the consignment tracking number is uploaded to the buyer’s Ebay account. Please make sure there is somebody available to receive and sign for the consignment. The carrier will only attempt to deliver twice and if there is nobody there on both occasions the receiver will then have to collect from their local depot within 5 days.

International Posting / Shipping
We post / ship to eligible countries using Ebay’s Global Shipping Programme. 

Feedback - We are are a small family business and try our very hardest to offer the very best service possible to our valued clients like yourself. Please kindly contact us if you are not entirely happy and we will rectify the issue for you. Please be kind enough not to leave a Negative or Neutral Feedback or anything below a 5, as they can be very damaging to small companies like us. We trust you will be happy with your purchase, so please could you kindly leave us a 5* Positive Feedback if you would be kind enough to :)

Business seller information

Item Specifics

Brand Silverline or Draper
MPN 263511
Country/Region of Manufacture United Kingdom
Jewellery polyester resin epoxy resin polish
Product Technical Details See Item Description Below
Free Shipping Restrictions See Item Description Below
Motor Size 150W (1/5 hp)
Voltage 230 Volts Not suitable for 110V Countries eg North America
Electric Plug Please read below for further details
Assembly The polishing kit needs to be assembled.
Delivery text
Payment text
Returns text

Metal Polishing Supplies UK Ltd

Unit 19 Fairways Business Centre
Airport Service Road
GB
PO3 5NU

Please feel free to contact us on the following number 7738860126. Alternatively, you can send an email to joe@metalpolishingsupplies.co.uk.

Store Feedback

Feedback/itemFrom Buyer Date/time
top ebayer a+++++ thankyou
Pro-Max 50g Bar Green Steel & Stainless Steel Metal Polishing Buffing Compound
64cabby64 (166)
15/02/2018
excellent
Pro-Max 6" 350W Bench Grinder And Metal Polishing Buffing Kit Machine 1.3
futurefires (330)
15/02/2018
Great seller item came on time thank you
Pro-Max 50g Bar Green Steel & Stainless Steel Metal Polishing Buffing Compound
miswilkinso_0 (91)
15/02/2018
Great ebayer! Very fast delivery! Thank you ..
Satin Web "ScotchBrite" Metal Sanding Wheel Fine 4" by 5 Section
3945leek (437)
15/02/2018
Great product and professional seller! ! +++++
375W Bench Grinder And Metal Polishing Buffing Kit
ant1106azz (220)
15/02/2018