1 piece ST62E15S1 / HWD | HWD = Hardware Watchdog | 8-BIT EPROM MICROCONTROLLER
WITH A/D CONVERTER, TWO TIMERS, OSCILLATOR SAFEGUARD & SAFE RESET
CSO-28 package
The ST62T25, ST62T15 and ST62E25 devices are low cost members of the ST62xx 8-bit HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach:a common core is surrounded by a number of on-chip peripherals. The ST62E25 is the erasable EPROM version of the ST62T25 device, which may be used to emulate the ST62T15 and ST62T25 device, as well as the respective ST6215 and ST6225
ROM devices. OTP and EPROM devices are functionally identical.
• 3.0 to 6.0V Supply Operating Range
• 8 MHz Maximum Clock Frequency
• -40 to +85°C Operating Temperature Range
• Run, Wait and Stop Modes
• 5 Interrupt Vectors
• Look-up Table capability in OTP, EPROM
• Data Storage in Program Memory: User selectable size
• Data RAM: 64 bytes
• User Programmable Options
• 12/20 fully software programmable I/O as:
- Input with pull-up resistor
- Input without pull-up resistor
- Input with interrupt generation
- Open-drain or push-pull output
- Analog Input
• 4 I/O lines can sink up to 20mA to drive LEDs or TRIACs directly
• 8 bit timer with a 7-bit programmable prescaler and external input.
• Hardware Watchdog = HWD
• Low Voltage Detector for Safe Reset
• 8-bit A/D Converter with 16 analog inputs
• On-chip Clock oscillator can be driven by Quartz Crystal or Ceramic resonator
• Power-on Reset
• One external Non-Maskable Interrup
NOT PULLED - NOT USED - NOT REFURBISHED - NOT SOLDERED - NOT RE-MARKED - NOT FAKED EXCLUSIVELY NEW OLD STOCK (NOS)
The devices are from old stock (OEM industrial , mainly from Germany), but they are NEW and UNUSED (NOS devices)
Taken out from the original packaging ( see photo).
What you see on the photo, is what you get .
If you need a higher quantity, please ask for a special offer or give us for the higher quantity your best offer.