• 100% brand new and high quality
• Color: Blue
• Size:9.7x6.3x2.5cm(approx)
• Frequency Range: 950-2150MHz
• Supply Voltage: 13-18V DC
• Input Level Range: -40dBm~ -10dBm
• Operating Temperature: 0-40
• Impedance: 75Ω
• Use LCD to display the satellite signal intensity
• Built-in signal alert buzzer
• With LCD backlight / buzzer and attenuation control function
• DC pass to LNB
• ATT increasing key. If the incoming signal is too strong,(the thermometer-scales shows max and the signal strength value shows 99) it can easily be attenuated by enabling this "attenuation" funtion, it reduces the incoming signal to a lower level. There are four step attenuation totally.
  
  HOW TO CONNECT:
• connect a jumper cable from the LNB to the "Satellite" port on the digital SATFINDER.
• connect the cable from your satellite receiver to the "Receiver" port on the digital SATFINDER.
  
  
  
  NOTICE:
• To avoid a continuous full scale reading, do not use the digital SATFINDER directly in front of the dish.
• When using a LNB with gain higher than 60dB, insert a 5dB attenuator between the LNB/LNBF and the digital SATFINDER.
• In case no satellite receiver is at hand a 13-18V DC power supply with F-connector can be connected on the "Receiver" side of the digital SATFINDER to power the SATFINDER
• Due to the difference between different monitors, the picture may not reflect  the actual color of the item. Please understand, Thank you

Package includes:

• 1 x Digital Satellite Finder
• 1 x English User Manual