PERRIN has been known since our inception for the quality of our Up-Pipe. The Up-Pipe was the first product we ever released and has been a leader in this market ever since. Our Up-Pipe is one of the best ways to increase the power and throttle response on your Turbocharged Subaru. Why go with an imported imitation when you can have the original?
Precision CNC Bent Tubing
321 stainless steel tubing is CNC mandrel bent and precision welded to perfection. This eliminates the need for a flex joint, which is a major weakness in other up pipes including the OEM one.
Critical Correct Sizing
The PERRIN Up-Pipe inside diameter best matches the OEM exhaust manifold outlet and OEM turbo inlet. This is critical to maintaining exhaust gas velocity increasing turbo spool up. Typically we see 250-350 RPM quicker turbo spool up after installation. For a stock turbo, the 1.75" Up-Pipe is the perfect choice for spool and HP. Our 2" Up-pipe is a perfect choice for those looking for a larger Up-Pipe for higher HP applications.
Flanges
PERRIN Flanges are CNC machined from 304 stainless steel, 1/2" thick and counterbored on the back side to make a smooth transitions from cylinder head to exhaust tubing.
Off Road Use Only
This product is legal in California only for racing vehicles which may never be used upon a highway. Check your local and federal laws prior to installation.
5 Year Warranty
PERRIN Performance warrants to the original purchaser, all PERRIN products to be free from defects in material and workmanship within a sixty (60) months period from the date of purchase.
Warranty Exclusions
We will not warranty any exhaust part that fails or has warped flanges with header wrap installed. We will not warranty any exhaust part that fails or has warped flanges with header wrap installed. While header wrap protects the engine from heat as well as provides some performance benefits, it greatly reduces the life of any stainless steel part. Header wrap greatly increases the rate of corrosion (even stainless steel corrodes), added to that the actual temperature of the metal is much hotter, reducing its lifespan even further. Operation of vehicle without installation of splash guard will void warranty.
We will not warranty any flanges that are warped away from the weld if any aftermarket gaskets are used. Only OEM Subaru gaskets are to be used on this PERRIN Exhaust part, with the exception of downpipes for turbo kits. Subaru provides the proper crush gasket that still becomes flat when tightened (or over tightened) in comparison to aftermarket gaskets which can have a crush ring that is too think causing a hot-spot in the middle of the flange. These will warp the flanges of your PERRIN exhaust, causing a permanent exhaust leak that will not be fixable with a new gasket.