New Quartz Super-Sweep clock movement with hands

This movement is much quieter than the standard sweep movements and ideal if you want minimal noise from your clock

For fitting instructions please see our you-tube video simply copy and paste into your browser

http://youtu.be/T5UZzXiEDmE

Movement Dimensions:

55mm x 70mm* x 17mm

*(this can reduced to 55mm if the built in hanger is removed)

 

3 shaft lengths available:

Movement	Brass thread	Total length	Width
Short:  For clock dials up to 3mm thick	5mm	14mm	7.5mm
Medium: For clock dials up to 8mm thick	11mm	18mm	7.5mm
Long: For clock dials up to 12mm thick	14.5mm	22mm	7.5mm
Select what shaft you need……	By comparing the thread length….	And the total  shaft length….	With your existing movement….

 

1:Simply compare your movement with the dimensions above and select the movement you need from the drop down menu.

2: Select hands: All hands measurements are for the minute hand and taken from the middle of the hole to the tip.

Movements come with a set of hands, a rubber washer, a flat metal washer, and hex nut.

If you need any help with these movements please contact us via ebay messaging