JEEP XJ YJ TJ DANA 30 OR 44 OUTER AXLE SHAFT WITH NUT NEW ORIGINAL OEM DANA SPICER PARTS This outer axle shaft, P/N 43205, was used by Jeep in almost all of the Dana 30 front axles, both in Disconnect and Non Disconnect axles from 1985 to 2006. Some exceptions to this would be the Disconnect Dana 30 front in 1987 1/2 to 1988 XJ Cherokee Bill of Material number 610279 and a Non Disconnect Dana 30 Front in 1990-1991 Bill of Material number 610318. For some unknown reason Jeep used a smaller U Joint in these years and Model of XJ Jeeps. In these years Jeep used a 5-260X U Joint which is a smaller U Joint with smaller diameter caps. The cap diameter on a 5-260X are 1.062 inches. The cap diameter on a 5-760X, the bigger U Joint used in all the rest of the Dana 30 and Dana 44 front axles with U Joints is 1.19 inches. If you don't have your Bill of Material number, the next best way to check and see if you have the smaller U Joint is by measuring the cap diameter.
When measuring front axle shafts, all measurements should be taken from center of U-Joint to end of the spline. If this is not the axle shaft you are looking for check my e bay store or call me at the number below and I will do my best to find what you are looking for. We have both new and used axle shafts in stock, from the 60's to present. Questions? Feel free to ask us! Just click on the link to e-mail us. We usually respond within 24 hours. _________________________ PAYMENT INFORMATION We accept the following payment methods from U.S. buyers:
Credit card payments can be made directly through Pay Pal, International buyers:
All payments must be received 10 days after purchase or auction end. After 10 days a non-paying bid alert will be filed with eBay. _________________________ SHIPPING INFORMATION We ship:
Please e-mail for shipping estimates not specified on listing. |
DANA’S LIMITED LIFETIME WARRANTY:
Dana Corporation warrants that this product will be free from defects in material and workmanship for as long as you own the vehicle. We will replace this product, if found to be defective, when accompanied with the original sales receipt. This warranty does not include labor, incidental or consequential damages and is void if the product was not properly installed and maintained or used in an application for which it is not listed in the Spicer Catalog.
This warranty does not cover normal wear and tear. Because of Dana’s stringent and high standards, It has been my experience as a Dana Spicer distributor, that you can expect well over 100,000 miles out of Dana Spicer products when maintained properly.