CMS50M CONTEC LED Fingertip Pulse Oximeter Spo2 Monitor
Instructions
Principle of the CMS50M Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.
Major Features
◆Integrated with SpO2 probe and processing display module
◆Small in volume、light in weight and convenient in carrying
◆Operation of the product is simple, low power consumption
◆SpO2 value display
◆Pulse rate value display, bar graph display
◆Pulse waveform display
◆The display mode can be changed
◆Screen brightness can be changed
◆Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage
◆Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe
◆Display format can be saved after power off
Main performance
Display Mode: LED display
SpO2 Measuring Range: 0%～100%, (the resolution is 1%).
Accuracy: 70%～100%: ±2% ,Below 70% unspecified.
PR Measuring Range: 30bpm～250bpm, (the resolution is 1bpm)
Accuracy: ±2bpm or ±2% (select larger)
Measurement Performance in Weak Filling Condition:
SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).
Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.
Power Consumption: less than30mA
Voltage: DC 2.6V~3.6V
Power Supply: 1.5V (AAA size) alkaline batteries × 2
Battery working hour:The minimum continually work time is 20 hours, theoretical number is 36 hours.
Safety Type: Interior Battery, BF Type
Accessories
Sell in standard:
◆A hanging rope
◆A user manual
Physical Identity
Dimension: 57(L) × 31(W) × 32(H) mm
Weight: About 50g (with the batteries)
Buy Safe Product!
The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item.
Contec Medical Systems Co.,Ltd, manufacturer
The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG)
with the code 136606