BESTWAY AIRBED / LAY-Z-SPA INFLATABLE HOT TUB REPLACEMENT PARTS



Lay-Z-Spa Air Blower / One Way / non return Smart Valve


Our Smart Valve is made from silicone (improved formula) that will last many years!


This valve was designed to withstand harsh chemicals and heat!


If your Spa is leaking from the A Pipe (Air Blower) then your Non return valve may have perished or even be missing. It's quite difficult to replace the mushroom valve itself as it's located deep inside the A pipe and you may need to drain the spa.


Our Smart Valve is designed to be installed within seconds and will not leak! It will also stay in place once pump is removed. You don't need to empty your spa either!


Our mushroom Valve is made from super soft and stretchy silicone that will not leak and will not break like other 3D printed valves on Ebay.



Lay-Z-Spa SID Air Valve (WHITE or BLACK)

screws onto the inflatable liner on a Lay-Z-Spa. It has a cap which can be opened up to easily insert an inflation hose when you need to inflate the liner. When the cap is closed, it prevents air escaping from the liner. Compatible with the following Lay-Z-Spa models:

Bestway Lay-Z-Spa Premium/Miami Model Number BW54112 (Later Style)
Bestway Lay-Z-Spa Vegas Later Style (with either single valve or 3 valves)
Riviera
Saint Tropez
New York
Paris
Vegas
Miami
Maldives
Bali
Tahiti
Cancun
Ibiza
Havana
Baja
Rio
St Lucia
Bahamas
Barbados
Madrid
Palma
Fiji
New York
Will still fit older Spa models but will be tight fit!
Bestway Airbeds with 22mm thread
   
 Essential for screw and deflation
    Prevents air leaking from the Lay-Z-Spa or Bestway Airbed
    Direct replacement for a lost or broken valve
    Makes an incredibly handy spare
    Screw diametter 22mm approx.


Lay-Z-Spa Stopper Caps

are direct replacements for the stopper caps provided with a Lay-Z-Spa Monaco (54113), Vegas (54112), Miami (54123), Palm Springs (54129), Paris (54148). They’re specifically designed to prevent water flooding your lawn when disconnecting a filter pump.

The Lay-Z-Spa caps attach to the inlet and outlet points on the inside of your Lay-Z-Spa. If you need to disconnect your heater pump, or you’re packing your Lay-Z-Spa away for the season, stoppers an absolute necessity. They’re also handy to keep as Lay-Z-Spa spares.

Note: Lay-Z-Spa Stopper Caps are specifically designed for the Lay-Z-Spa Monaco (54113), Vegas (54112), Miami (54123), and Palm Springs (54129).

Compatible with Lay-Z-Spa Miami (54113)
Compatible with Lay-Z-Spa Vegas (54112)
Compatible with Lay-Z-Spa Monaco (54123)
Compatible with Lay-Z-Spa Palm Springs (54129)
Compatible with Lay-Z-Spa Paris (54148)


Bestway SID Valves for XL / OVAL Models

(Smart Inflation/Deflation) help to keep the inflatable liner of a Bestway Lay-Z-Spa as airtight as possible whilst ensuring effortless inflation and deflation.
Compatible with the Lay-Z-Spa Oval XL (54090) and Lay-Z-Spa Premium 1, 2 and 3 (54075) the SID Valves are essential Lay-Z-Spa replacement parts. Although SID Valves would have been included with your Lay-Z-Spa they're small and easy to misplace so it's always a good idea to keep a few as spares.
SID Valves simply screw onto the inflation hole on the outside of a Lay-Z-Spa liner. The Lay-Z-Spa spares have been specially designed with an airtight cap which is incredibly easy to open and close. The holes on the Bestway Lay-Z-Spa parts have been designed to allow the maximum amount of air to enter, enabling quick and easy inflation.
Note: only compatible with Lay-Z-Spa Oval XL (54090) and Lay-Z-Spa Premium Series 1, 2 and 3 (54075) model

    Essential for screw and deflation
    Prevents air leaking from the Lay-Z-Spa
    Direct replacement for a lost or broken valve
    Makes an incredibly handy spare



Lay-Z-Spa Stopper Caps (XL / OVAL Models)

are direct replacements for the stopper caps supplied with a Lay-Z-Spa Round Premium (54075) or Lay-Z-Spa Oval Premium (54090). They are specifically designed to prevent water flooding your lawn when disconnecting a filter pump.
The Lay-Z-Spa stop caps attach to the inlet and outlet points on the inside of your Lay-Z-Spa. If you need to clean your filter pump, or you're packing your Lay-Z-Spa away for the season, stoppers an absolute necessity. They are also handy to keep as Lay-Z-Spa spares.
Note: Lay-Z-Spa Stopper Caps are specifically designed for the Lay-Z-Spa Round Premium (54075) or Lay-Z-Spa Oval Premium (54090).
Compatible with Lay-Z-Spa Round Premium (54075)
Compatible with Lay-Z-Spa Oval Premium (54090)



A filter housing

is used to house a filter cartridge on a Lay-Z-Spa. Simply place a filter cartridge inside the cartridge holder and screw the parts together to secure it. You can then screw the cartridge holder onto the liner of your Lay-Z-Spa to trap dirt and debris. It can be used as a direct replacement if the filter set supplied with your Lay-Z-Spa is damaged or broken.

Lay-Z-Spa Filter Set (3 parts)
Cartridge holder, debris screen and lock
Compatible with Lay-Z-Spa Vegas (54112)
Compatible with Lay-Z-Spa Monaco (54113)
Compatible with Lay-Z-Spa Miami (54123)
Compatible with Lay-Z-Spa Paris (54148)
Compatible with Lay-Z-Spa Palm Springs (54129)
Does not include a filter cartridge



Extra-safety buckles

are used to securely fasten the top cover to your Lay-Z-Spa. This prevents the top cover being blown off by the wind, insulating your spa whilst shielding the water from dirt and debris.The buckle can be used as a replacement for a broken buckle and is compatible with the following Lay-Z-Spa models:54112: Lay-Z-Spa Vegas, 54113: Lay-Z-Spa Monaco, 54123: Lay-Z-Spa Miami, 54138: Lay-Z-Spa Hawaii, 54148: Lay-Z-Spa Paris, 54129: Lay-Z-Spa Palm Springs



A drain valve adapter (GREY NOZZLE)

enables you to connect a hose to your Lay-Z-Spa and easily drain it. This particular model is a replacement for the drain valve adapter supplied with the following Lay-Z-Spa models:

    54112: Lay-Z-Spa Vegas
    54113: Lay-Z-Spa Monaco
    54123: Lay-Z-Spa Miami
    54148: Lay-Z-Spa Paris
    54129: Lay-Z-Spa Palm Springs

Not compatible with Lay-Z-Spa Hawaii or Palm Springs Hydro-Jet (EU Models)


A drain valve adapter (BLACK NOZZLE)

enables you to connect a hose to your Lay-Z-Spa and easily drain it. Note: Lay-Z-Spa Drain Valve is only compatible with:

    54113: Lay-Z-Spa Monaco
    54112: Lay-Z-Spa Vegas
    54123: Lay-Z-Spa Miami
    54129: Lay-Z-Spa Palm Springs




Inflation hose

is used to connect the heater pump to the inflatable liner on the Lay-Z-Spa Palm Springs. This enables you to automatically inflate your Lay-Z-Spa using the pump’s inflation setting. The hose can be used as a direct replacement if your existing hose is broken.

    Lay-Z-Spa Miami Inflation House
    Compatible with Lay-Z-Spa Palm Springs (54129)
    Not compatible with Lay-Z-Spa Vegas, Monaco, Miami, Paris or Hawaii



Air Stopper Cap "A"

used on all Lay-Z-Spa models. Whenever you disconnect the spa pump for cleaning or maintenance, you should screw the air lid adapter onto the air hole (A) on the liner.

    Screws onto the air hole (A) on a Lay-Z-Spa liner
    Compatible with Lay-Z-Spa Vegas (54112)
    Compatible with Lay-Z-Spa Monaco (54113)
    Compatible with Lay-Z-Spa Miami (54123)
    Compatible with Lay-Z-Spa Hawaii (54138)
    Compatible with Lay-Z-Spa Paris (54148)
    Compatible with Lay-Z-Spa Palm Springs (54129)



Lay-Z-Spa B/C Coupling

is a replacement for a missing or broken B or C coupling on a Lay-Z-Spa Monaco (54113), Vegas (54112), Miami (54123), and Palm Springs (54129) filter pump. Without a B/C coupling, your Lay-Z-Spa will stop circulating water efficiently.
This is because the Lay-Z-Spa coupling is used to connect the B or C pipe on a filter pump to the inlet and outlet on a Lay-Z-Spa. If your existing B or C coupling is badly damaged, you're more likely to notice water drizzling out of the pipes and draining your Lay-Z-Spa.
If left too long, this can slow the flow of water and start to affect its cleanliness. This makes the B/C coupling one of the most important Lay-Z-Spa parts to have in full working order. As a result, we suggest keeping a couple of couplings as Lay-Z-Spa spares.

Lay-Z-Spa B/C Pipe Coupling
Compatible with Lay-Z-Spa Miami (54113)
Compatible with Lay-Z-Spa Vegas (54112)
Compatible with Lay-Z-Spa Monaco (54123)
Compatible with Lay-Z-Spa Palm Springs (54129)


Lay-Z-Spa Filter:
This new and improved design sees the old style two pack of Lay-Z-Spa filter cartridges re-designed into one big cartridge to give you better value for money.
This new filter cartridge comes in a pack of 2, but you only need to use one of them at a time in your pump housing unit.

Compatible with Lay-Z-Spa Miami
Compatible with Lay-Z-Spa Vegas
Compatible with Lay-Z-Spa Monaco
Compatible with Lay-Z-Spa Palm Springs
Compatible with Lay-Z-Spa Paris
Compatible with Lay-Z-Spa Hawaii



Lay-Z-Spa Debris Screen:

is a replacement for a missing or broken debris screen on a Lay-Z-Spa Monaco (54113), Vegas (54112), Miami (54123), and Palm Springs (54129). Without a debris screen, large debris could infiltrate and block your Lay-Z-Spa filter pump.
The Lay-Z-Spa parts simply screws into to the filter pump inlet on the inside of your Lay-Z-Spa. By obstructing large debris as water circulates out of your spa, it decreases the amount of cleaning and maintenance required to keep you pump system running.
Note: Lay-Z-Spa debris screens are only compatible with the Lay-Z-Spa Monaco (54113), Vegas (54112), Miami (54123), and Palm Springs (54129).


An air release valve:

is used to release excess air pressure inside a Lay-Z-Spa filter pump. If your existing air release valve is damaged or broken, you will need a replacement in order to safely and effectively operate the pump. The air release valve is compatible with pumps supplied with the following Lay-Z-Spa models:

54112: Lay-Z-Spa Vegas
54113: Lay-Z-Spa Monaco
54123: Lay-Z-Spa Miami
54148: Lay-Z-Spa Paris
54129: Lay-Z-Spa Palm Springs

‘A’ Coupling complete with rubber seal:

for all Lay-Z-Spa AirJet™ Hot Tub models (Siena, Miami, Havana, Paris, Palm Springs, New York, Vegas, Saint Tropez, Hawaii and Monaco).If the ‘A’ Coupling supplied with your Lay-Z-Spa AirJet™ Hot Tub is lost or damaged, this ‘A’ Coupling can be purchased as a direct replacement.The ‘A’ Coupling is used to secure the ‘A’ pipe on the heater pump to your Lay-Z-Spa liner. The ‘A’ pipe is used to inflate the liner via the heater pump. It also creates the relaxing bubbles in your spa. If you don’t have an ‘A’ Coupling, you’ll be unable to secure the ‘A’ pipe to the liner and inflate it with the heater pump. You’ll also be unable to operate the massage system.Compatible with all Lay-Z-Spa AirJet™ Hot Tubs

    Lay-Z-Spa Paris AirJet™ Hot Tub (BW54148)
    Lay-Z-Spa Vegas AirJet™ Hot Tub (BW5412)
    Lay-Z-Spa Hawaii AirJet™ Hot Tub (BW54154)
    Lay-Z-Spa Miami AirJet™ Hot Tub (BW54123)
    Lay-Z-Spa Monaco AirJet™ Hot Tub (BW54113)
    Lay-Z-Spa Palm Springs AirJet™ Hot Tub (BW54129)

Not compatible with: Lay-Z-Spa HydroJet™, Lay-Z-Spa Hawaii HydroJet™, (BW54138) and Lay-Z-Spa Palm Springs HydroJet™ Hot Tub (BW54144)


Lay-Z-Spa HydroJet Drain Adapter:

It allows you to attach a hose to the inflatable liner and easily drain the Lay-Z-Spa of water. If the drain adapter supplied with your Lay-Z-Spa is lost or broken, this part can be bought as a direct replacement. The adapter is compatible with following Lay-Z-Spa models: 

  • Lay-Z-Spa Palm Springs HydroJet (BW54144)
  • Lay-Z-Spa Hawaii HydroJet Pro (BW54138)
  • Lay-Z-Spa Maldives HydroJet Pro (BW54173GB)

 

Lay-Z-Spa HydroJet O Coupling:

It allows you to attach a pump to the inflatable liner. Compatible with following Lay-Z-Spa models:

  • Lay-Z-Spa Palm Springs HydroJet (BW54144)
  • Lay-Z-Spa Palm Springs HydroJet (BW54144)
  • Lay-Z-Spa Hawaii HydroJet Pro (BW54138)
  • Lay-Z-Spa Maldives HydroJet Pro (BW54173GB)

Lay-Z-Spa HydroJet O Ring:

Compatible with following Lay-Z-Spa models: 

  • Lay-Z-Spa Palm Springs HydroJet (BW54144)
  • Lay-Z-Spa Hawaii HydroJet Pro (BW54138)
  • Lay-Z-Spa Maldives HydroJet Pro (BW54173GB)

Lay-Z-Spa Water Pump Seal / O Ring:

Compatible with following Lay-Z-Spa models: 

  • Vegas
  • Miami
  • Monaco
  • Palm Springs
  • Coleman
  • St Moritz
  • Bali
  • Hydro Jet


Lay-Z-Spa Water Pump Stainless Steel Impeller Shaft (68mm long)

Direct replacement for a damaged ceramic shaft originally fitted in early Lay Z Spa pumps

Compatible with following Lay-Z-Spa models: 

  • Vegas
  • Miami
  • Monaco
  • Palm Springs
  • Coleman
  • St Moritz
  • Bali
  • Hydro Jet


Non Return Valve "A"


PLEASE NOTE: This is NOT 3D printed valve that will brake after couple of weeks, this valve was made from silicone (improved formula) that will last many years!

This valve was designed to withstand harsh chemicals and heat!

If your Spa is leaking from the A Pipe (Air Blower) then your Non return valve may have perished or even be missing.

A short installation video can be found on youtube (easy done!)

This listing is for one non-return valve only. Other parts in the picture is to show the fitting and product from every angle
  • Fits into the air hole (A) on a Lay-Z-Spa liner
  • Compatible with:
  • Vegas (54112)
  • Monaco (54113)
  • Miami (54123)
  • Hawaii (54138)
  • Paris (54148)
  • Palm Springs (54129)
  • Bali
  • Cancun
  • Hawaii
  • Helsinki
  • Milan
  • Monaco
  • New York
  • St Tropez
  • St Moritz




30 Days No Quibble Money Back Guarantee If Unhappy With Your Purchase! No Questions Asked! Buy With Confidence!