One sheet of electrically conductive film of ITO on PET.

Size 300mm X 200mm.

ITO coated PET film is a vacuum-deposited Indium Tin Oxide (ITO) on optical grade polyethylene terephthalate film (PET). The conductive ITO layer is strongly adhered to the PET substrate and is thin enough to maintain high visible light transmission >80% for sheet resistance of 30 ohm/sq.

ITO on PET conductive film is both flexible and transparent.

Sheet resistance of 30 ohm/square is good balance between conductivity and transparency.

  • Lower sheet resistance = higher conductivity

  • Please note: higher conductivity = thicker ITO layer = limited ability to bend without cracking the ITO layer and damage conductivity.


The film is protected on both sides with protective film that can be easily peeled off before use.

A multimeter may be used to confirm which is the conductive side.


Product

ITPC30

PET film thickness

175um (7 mil.)

Transmittance

>80%

Sheet Resistance

30 ohm / square

Protective masks on both sides

Yes

Potential Applications

OLEDs

Flex. Solar cells

Sensors

Touch screen

EL devices

Smart windows

EMI shielding

Transparent heaters



 SILVER NANOFILM ON PET -  9 ohm/square      ***       PEDOT:PSS Conductive polymer    

                          

 

        PEDOT:PSS ink -Fully formulated                  ****             Electroluminescent Powder + BaTiO3 


       


Titanium Carbide (TiC) Powder                      ***       Antimony Tin Oxide (ATO) Conductive Powder

               


  MAX Phase Ti3AlC2 – Ternary Layered Ceramics           ***       Lanthanum Hexaboride LaB6