CNC ROUTER ENGRAVING MACHINE ENGRAVER 6040T COOL SPINDLEMOTOR VFD 1500W
Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included).
It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt
the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems
with the Parrallel port driver. These issues are detailed and fully explained on the Mach3 Software website.
Description
1.This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation,
Teaching, Student Project and Hobby Purposes.
2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board,
native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to
engrave them into 3D/2D works etc.
3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy,
acrylic plates, ABS resin double color plate,
PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.
4.The mini CNC router Frame is movable. The machine can connect with computer as other external device such
as printer , scanner...
5.With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.
ITEM parameters:
X,Y,Z Working Area:600(Y)*390(X)*120(Z)mm
Outside dimension:865*680*570mm(L*W*H)
Table size:770(Y)*490(X)mm
Lathe structure:6061/6063 Aluminium alloy
Max. Feeding height:≤100mm
Drive unit:
X axis 1605 Ball Screws
Y axis 1605 Ball Screws
Z axis 1204 Ball Screws
Sliding unit :
X axis High intensity Chromeplate shaft
Y axis:High intensity Chromeplate shaft
Z axis:High intensity Chromeplate shaft
Stepping motor:57 two-phase 3A 150N.cm
Spindle motor:
(tips:1,The spindle motor must connect with the VFD.
2,It cannot directly connect with the supply voltage (AC110V/220V).
3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.)
Outside dimension:65*158mm
Material:304 stainless steel,Copper coil,Pressure cast aluminum pipe water jacket
VOLTS,current,power:AC220V/50Hz,5A,1.5KW VFD
Spindle speed:24000 rpm
Max working frequency:400Hz
Principal axis collet:ER11collet,Standard configuration :6mm
Nut Model:ER11-A
Cooling:Water-cooling
Speed mode:By adjusting the VFD output voltage and operating frequency from 0-24000RPM
Lubrication way:lubricated by high grease
Repeat accuracy:0.05mm
Spindle precision:radial beat acuities 0.03mm
Carving Instructions:G code / TAB files / nc file / NCC files
Communication interface:through parallel connection with computer
Software environment:windows XP / win7
Maximum speed:0-4000mm/min
Carving speed:0-2500mm/min(different materials differ)
Friendly reminder: The engraver will come with MACH3 software(Free Version
If you followed the intsalation tips offered by us, it works like full version.)
intsalation tips:
The software perferm better on the 32bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important)
Otherwise, the antivirus will regards the cnc software is virus and stop the installation.
PS:
Please don't update the software when installed, then it will not need the license Numbers.
Control box parameters:
Operating Voltage:AC220V~240V
Control unit:Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection:on board palrallel port
Command code:G code
Acceptable software:Mach3,EMC2
Protection:Emergency stop button
Machine Weight:80.6kg
Feature:
1,The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the
processing abilty of the machine and can be used to
process aluminum alloy and hard wood.
2,water cooling spindle works more stable and durable.
3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.
4, Software Compatability:Mach3/Emc2/Type3/ArtCAMParameter
How to use
1.Assembling and locating the CNC machine on steady desk well.
2.Make sure that your computer has a 25pin parallel port output.
3. Place the contral box in a ventilated dry place where there is no dust,no moisture
4.Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.
5.Correctly connect the machine with the controller. Don't suspended the cable which connect the