The OConnor C1245-1001 Universal Baseplate allows
you to attach accessories to small and medium sized digital cine
cameras, and offers a sturdy support to keep the lens parallel to the
rods. Providing a solid support, it also allows you to interface with
standard studio bridge plates for setups having large and heavy lenses.
The Baseplate set consists of four 67.4mm rods, two 1/4” and one 3/8”
3-way camera screws, dual 15mm LWS horizontal rod brackets, top camera
plate with interchangeable tie-down screws, and bottom camera plate with
flip-up access port for slotted screw driver.
You can remove the
four vertical 15mm rods from the Universal Baseplate in order to
support any camera on standard 15mm or 19mm studio bridge plates. The
C1245-1001 Universal Baseplate allows you to vertically adjust the
standard set of 15mm rods attached to the LWS rod brackets, so that the
plate can accommodate cameras of all sizes.
A channel in the top
plate with a cutout plug allows you to easily insert or remove the 3-way
camera screws. You can tighten the screws by hand, with tools or by
inserting a slotted screwdriver through a unique flip-up bottom plate
access panel.
- Allows you to attach accessories to small and medium sized digital cine cameras
- Offers a sturdy support to keep the lens parallel to the rods
- Allows you to interface with standard studio bridge plates for setups having large and heavy lenses
- You can remove the four vertical 15mm rods from the Universal Baseplate in order to support any camera on standard 15mm or 19mm studio bridge plates
- Allows you to vertically adjust the standard set of 15mm rods attached to the LWS rod brackets so that the plate can accommodate cameras of all sizes
- A channel in the top plate with a cutout plug allows you to easily insert or remove the 3-way camera screws
- You can tighten the screws by hand, with tools or by inserting a slotted screwdriver through a unique flip-up bottom plate access panel