Inateck PCI-E to USB 3.0 (5 Ports) PCI Express Card and 15-Pin Power Connector, Red (KT5001)
About this item
- PCIe USB 3.0 Card: SuperSpeed USB 3. 0 supports transfer rates of up to 5Gbps - The actual transmission speed is limited by the setting of the device connected
- One Step Update your Computer to 5 ports USB3. 0 Easily with PCI Express to USB3. 0 Controller Adapter Card; 1 USB 3. 0 20-pin Connector ( expand another two USB 3. 0 ports )
- Backwards compatible with USB 2. 0 and 1. 1 devices; Operating System Compatibility: Windows XP/Vista/7/8/10,Mac OS 10. 8 or above.
- With easy installation, this USB 3. 0 PCI express I/O Card offers a simple solution for your standard desktop PC
- Windows XP and Vista Users Please Note: Due to OS limitations, the real transfer speed after installation of the respective drivers will be located between the level of USB 2. 0 and 3. 0
| Brand | Inateck |
| Hardware Interface | PCI Express x4 |
| Item Dimensions LxWxH | 4.72 x 2.56 x 0.71 inches |
| Style | 5 USB 3.0 Ports |
| Item Weight | 2.08 Ounces |
Due to frequently updated drivers, please download the latest version on our official website to enhance your using experience.
Features
-Extend with 5 USB 3.0 downstream ports and 1 USB3.0 20-pin Connector (can expand another two USB 3.0 ports) for standard desktop PC -Support UASP:70% Faster than traditional USB 3.0 with UASP. The UASP Transfer Protocol only can accelerate read and write speed of SSD hard disk
Operating Systems
Windows XP, Vista and Windows 7(with included drivers) Windows 8/10-No additional drivers are needed for Win8/10, it has built-in support for the FL1100 chipset
Notice
- If your PC's power supply unit only has free 4pin Molex plugs left, please use the enclosed 4pin Molex to SATA converter to power the card.Please make sure the power cable strand colours match each other when connecting to the power augmentation, as to avoid faulty currents. - If there is no free 15pin SATA plug available in your PC, please use the enclosed 15pin to 2x 15pin SATA Y-cable. - Internal USB3.0 20PIN Connector need work with USB3.0 20PIN Adapter to Achieve 2x USB3.0 Hosts - USB3.0 20PIN Adapter is not included in Package - To ensure the PCI Express Card works properly, please first connect the PCI Express Card to your PC's power supply. - Aggregate transfer speed up to 500 MB/s (500 MB/s in total for the whole). For Oculus Rift users, it is recommended to purchase two PCI-E cards for multiple sensors. - This PCI-E card is not recommended to Kinect 2 users.
Package
1x USB3.0 PCI-E expansion card 1x SATA to 4 Pin Molex Power Converter (the cable in older computers without 15pin SATA power connector is used to 4pin convert Molex to SATA ports) 1x 15pin to 2x 15pin SATA Y-cable 1x CD Driver 1x Mounting Screw 1x User's Manual
Operating System Compatibility:
Compatible with Windows XP/ Vista/ 7/ 8/ 10. Windows 10 and Mac 10.8.2 and more latest systems are built with a driver inherently. Windows systems earlier than Windows 10 and Mac OS earlier than Mac 10.8.2 require installing a driver in CD
Cable Connected Attention:
Please make sure the power cable strand colours match each other when connecting to the power augmentation, as to avoid faulty currents.
Package List:
1x USB3.0 PCI-E expansion card, 1x CD Driver, 1x mounting screw, 1x User Manual, 1x 4pin to 2x15pin cable (If no 15pin SATA power connector in your PC, please use the 4pin Molex to SATA converter）, 1x 15pin to 2x 15pin SATA Y-cable
Step 1:
Shut down the PC and unplug the power supply. Then open the PC case to find the corresponding PCI-E interface on the motherboard.
Step 2:
Plug in the expansion card and tighten the screws.
Step 3:
Connect the power supply cable in the correct direction.
Step 4:
Close the PC case cover.
Step 5:
If the computer does not pop up the driver automatically, please install the driver from the CD included in the package.
Friendly Service :
We provide friendly after service.
