U-VISION 4K
ULTRA HD UP-CONVERSION HDMI CABLE
The Seiki
U-VISION cable creates a new market in 4K HDMI video accessories. U-VISION is a
High Speed HDMI cable capable of handling the high bandwidth required for 4K
Ultra HD support and also features active 4K video processing embedded inside
the cable. The embedded low-power video processor enhances and up-converts
video passing through the cable to 4K in compliance with HDMI specifications
delivering a near native 4K video experience. The U-VISION cable features
Marseille’s VTV-1222 processor to perform the up-conversion. In addition,
Technicolor (the most trusted name in post-production and creative services for
leading Hollywood studios) has certified the technology used in U-VISION to
meet the rigorous standards of Technicolor’s “4K Image Certified” test suite.
No need to wait for native 4K content! U-VISION is the perfect solution to accessorize
existing HD/SD source devices like Blu-ray, streaming media, or DVD, to deliver
high-quality 4K video directly to the TV’s input. The Marseille VTV-1222
processor used to perform the up-conversion has been Technicolor 4K Image
Certified to deliver the highest quality up-converted images in 4K. U-VISION
also supports HDMI High Definition Audio—for a full range of high definition
audio types, including SACD, DVD-Audio, DTS-HD Master Audio, and Dolby TrueHD.
Seiki U-VISION 4K HDMI CABLE KEY FEATURES
- Sony PlayStation VR (Virtual Reality) magic cable! https://youtu.be/aoBf7P57Yp8
- Up-conversion of 720p24/25/30fps and 1080p24/25/30fps content to 4K24/25/30 with video enhancement
- Up-conversion of 480/576p60 and 720p60 to 1080p60 with video enhancement
- Gamers will love the improved look of anti-aliased graphics up-converted from 480p/720p60 to 1080p60 with contextual edge restoration
- Cable audio/video latency is less than 1ms—perfect for gaming
- Contextual detail enhancement and noise reduction to enhance video appearance
- Contextual edge restoration of lines and curves for improved video, menus, and user interface Powered from any USB on TV or nearby A/V equipment
- Technicolor 4K Image Certified for the highest quality HD to 4K viewing experience
Cable Facts:
- The cord is 6ft long.
- Built in upscaling chip
- It has a USB input on one end that plugs in to your TV to power it.
- 4k display for blu rays on PS3 and most blu ray players.
- Upscales 720 to 1080p
- Will upscale 1080p at 25 to 30hz to 4kUHD
- Upscales 720p PlayStation games like GTA5 to 1080p 60hz
- Upscales Laptop's and PC's to 4k (Must adjust Hz setting to under 30)
- PC or Laptop can stream Youtube 4k
- Working with Multi out splitters
- will not upscale 1080p that is over 30hz to 4k
- Does not appear to work with Multi In HDMI splitters
FOR
BEST RESULTS FROM THE SEIKI U-VISION 4K HDMI CABLE
- Plug
the U-VISION USB power connector into the USB port of your 4K Display
- Plug
the U-VISION cable into your TV and source device with the processor end of the
cable plugged into the TV’s HDMI port;
- Turn
off or minimized the Sharpness settings of the Display
- Turn
off Motion Estimation and Motion Compensation or similar function of the TV;
- 5)
Enjoy beautiful 4K Ultra HD!
From
Seiki Help Desk
- For DIRECTV subscribers with 4K service, attach cord to DVR, not 4K receiver
- The cable is intended to be used to up-convert HD or FHD signals for 4K
screens with a built-in video processor. If the Netflix or cable source signal
is 30Hz or below, then the cable will work fine, if the source (cable box) is
60Hz, the cable will by-pass signal only without video processing,
up-converting or video enhancements
- This cable will only upscale to 4k @30Hz. It will work with a HDMI 2.0
port, but the max output is 4k @ 30Hz. The cable will upscale a signal to 4k
only if the input signal is 1080p @24/30Hz. For the xbox one, you can enable
24Hz support when watching blu-rays. For games, it will not upscale as the
ouput is not at 24/30Hz
- It will not work at all with cable boxes because all broadcasters only
send interlaced signals (1080i) Most Blu-ray discs are 1080p/30 which up
converts to 4k. Even if it's 1080p/50/60 it will not distort the picture even
though it will not up convert to 4k
- will not upscale 1080p that is over 30hz to 4k
- Does not appear to work with Multi In HDMI splitters
"The 6’ Seiki U-Vision HDMI Cable has a chip inside one of the elegant connector ends (the end with the USB power-insertion dongle) that not only “talks” to both the TV and the player in machine language but finds the suitable up-conversion frame refresh rate that maximizes image quality. I can honestly say that the cable actually created detail where none previously existed and made the movie look as if it were mastered in 4K. Apparently the chip does this by comparing one frame to the next and previous a one and literally fills in a ton of perfectly relevant information that is stunningly spot on. Since there’s a dearth of 4K programming available currently, if you happen to step up to a 4K screen you will definitely benefit from running movies through this remarkably affordable device that is worth every inexpensive penny."This review by Radames “Rod” Pera - San Diego, CA."
Product Return Requests for initial defects are eligible for a replacement and or exchange.
Product Return Requests for other concerns :
1. must be returned in it's original packaging
2. all of the contents included and packaging
3. There will be a 10% restocking fee
4. Buyer pays for return shipping charges