Dual 12 Stereo Level indicator LED VU Meter lamps Adjustable Light Speed Board

Description:

• 100% brand new and high quality
• Material: Electrical components
• Color: See pictures
• Description:
• Note: This is DIY Kits, you need to do it yourself! thank you!
• Special declaration:
• For some users that level light desensibility, please fill the user welding test the first thing you must press the button for 10 seconds to restore the settings of a factory!
• Because the program recorded on the chip is not in the initial working state, you must restore the factory settings after the level lights are in normal working condition! ..
• The sensitivity of the user feel the problem is to restore their own factory settings! .. as long as you did this operation, there will be no sensitivity problems, and the level of sensitivity to light than imagined much better! In particular, the automatic gain control signal the range is very large!
• The data will be saved automatically every 5 seconds after the setting is changed. The data will be extinguished all the time when the data is saved, and the data will be saved several times because the data factory will be saved for the first time. Power or make other settings and operations! If the power is changed immediately after the change, the changed data will not be saved. Please know
• Ultra-small size sound level lights, light bar can be adjusted to rise, the rate of decline and peak lamp residence time, the rate of decline.
• Each lamp created a current limiting resistor, ensure the same brightness of the different color lights, input signal through the op-amp amp,
  prevent single-chip high-frequency interference from AUDIO
• Characteristics:
• LED module Size: 58 * 14mm
• 2. The feature-rich, the user can freely adjust each light bar and the main peak of the actual light speed, with the most suitable for their own display
• 3. Audio input through the original IT signal isolation, the maximum to avoid the single-chip high-frequency interference to a serial audio circuit
• 4. Different colors of light alone provided a current limiting resistor. Ensure a perfect match.
  important note:
• 1. MCU in the sample-sampling time, so that there is simultaneous dual-channel parallel of the input signal changes rapidly, the amplitude of the two bar display light can vary, this is a normal situation.
• 2. In extreme cases, there may be slight high frequency noise. Recommended to replace the signal input line of the head position as dual-core shielded cable.
• 3. Operating Voltage: 7-12V 100MA current can work in more than. Prohibited or voltage exceeds 12V positive and negative reversed, if the person is going to cause minor level damage
• The effect of exposure:
• 1. strip show + after peak trip whereabouts
• 2. strip show after + disappearance of travel peak
• 3. The display range + (without peak exposure)
• 4. strip show + just after peak flow disappears
• 5. The display range + (three lights)
• 6. striped display marquise + peak effect
• 7. Peak + show lights strip lamp right jump two-bit whereabouts
    
• Operating Voltage: 7V-12V 100MA
• Light Colors: 7 Green + 2 Orange +  3 Red
• This lamp level Has standard display mode and a Wide range of automatic gain control (AGC) Mode
• Quantity: 1Pc
• Not Retail Package
• Note: Due to the difference between different monitors, the picture may not reflect  the actual color of the item. Thank you!

Package includes:

• 1x Mini Dual 12 Board DiK SomKits Level Change Indicator Lights
• 1x 5Pin Cables

• We accept payment through Paypal ONLY.
  
    All major credit cards are accepted through secure payment processor PayPal. Payment must be received within 7 business days of auction closing. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.

• We will automatically  leave a positive feedback to everyone who has  complete the transaction and leave us positive  feedback.

• Please do not forget  to give us Five Stars on all of the Detailed Seller  Ratings. Thanks!

• In the unlikely event  you are not satisfied with the transaction, please  contact us before you sumbit your evaluation. We  believe that everything could be solved by  communication.
  1.in order to provide you the best  service*****,please treat the transaction  fairly.*feedback is simply what we pursue.
  2.Please Do contact us first to get a better  solution before you would leave a *neutral or  *negative feedback
  3.We strive for 5-star service by stating upfront  our policies, our shipping rate& our shipping  frequency. if you were pleased with this  transaction, please respond with all 5 stars! if you  are not pleased, simply let me know via e-mial  rather than leave low score, and I'll work to make  it that way
  4.Please email me through 'MY MESSAGES' or "Ask  Seller Questions" if you have any question about our  listing or your purchase

•  We are in  Shenzhen of Pearl River Delta which is developed  place with economy and Trade We are a profession  trade company. There are about 16000 kinds of  products in my company,Our products include consumer  electronics, Nail Art Tools, Clothes and shoes, cell  phone accessories, computers  accessories, car accessories, Motorcycle accession,  toys & hobbies, jewelry, baby accessories other useful electronics  items and etc

• If you have any  problems, we are very glad to help you. We rare  handling large volume emails every day. Please allow  us to reply your email within 24hrs

• For the functional  products in our shop (such as: Chargers, Data  cables), which function is the same as description,  but the actual color and shape may looks a little  different from pictures because of the technical  improvement and actual stock state. Please be  advised before you bid.