Rustins Clear Metal Lacquer 125ml Prevents Oxidisation and Tarnishing of Metals
Rustins Metal Lacquer is a low solid lacquer based on a polymethacrylic ester dissolved in a mixture of Ketones, Alcohols and Hydrocarbons.
Dries to a completely clear colourless film preventing the oxidisation and tarnishing of brass, copper, bronze and silver.
The lacquer does not craze or yellow with ageing.
Made in the UK.
Size: 125ml
Usage Instructions:
Surface must be clean and free from all traces of wax, grease and metal polish.
Lightly tarnished surfaces should be cleaned with a good quality metal polish, which must then be removed with warm soapy water.
If the surface is not smooth, a nail brush should be used to ensure there is no polish left in the crevices.
The article should then be dried with a cloth.
The lacquer should be applied quickly and evenly with a soft brush.
The lacquer can be applied by spray and due to its low viscosity it is not normally necessary to thin.
If thinning is necessary, Rustins Cellulose Thinners can be used.
If possible objects such as letterboxes should be removed from the door so that at least one coat of lacquer can be applied to the edges of the reverse side.
Coats 1 coat is normally sufficient.
If used on exterior objects, two coats is recommended.
Drying Time 2- 3 hours depending on temperature and humidity.
Re-coating time 2- 3 hours if required.