Dear customer:
Thank you for visit our store,we are proffessional "Business & Industrie" seller for 10 years,our main products included:Sensors,modules devolpment board, LED displays, other IC procuts an so on,any question about DIY robot,Arduino,or Raspberry Pi will be welcome to discuss with us,we will try our best to supply the most advanced product and price,(if we sale more,the cost of made one product will be reduce and we will change or price to make you save more.
Hope you enjoying yourself here!
We appreciate your business!
We will arrange shipping for you within 24 Hours after payment cleared except the holidays.
We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
-We ship items to Worldwide. Thank you!
-we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.
We accept PayPal payment ONLY.
* We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
* If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
* Please include your eBay ID and item number with any email requests.
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "Delivery on time" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
Neu XR2206 1HZ-1MHZ Funktionsgenerator Signalgenerator Sine Triangle Square Wave
1.These are all the parts, it need your own welding and installatio
Voltage Supply: 9-12V DC Input
Waveforms: Square, Sine & Triangle
Impedance: 600 Ohm + 10%
Frequency: 1Hz - 1MHz
SINE WAVE
Amplitude: 0 - 3V at 9V DC input
Distortion: Less than 1% (at 1kHz)
Flatness: +0.05dB 1Hz - 100kHz
SQUARE WAVE
Amplitude: 8V (no load) at 9V DC input
Rise Time: Less than 50ns (at 1kHz)
Fall Time: Less than 30ns (at 1kHz)
Symmetry: Less than 5% (at 1kHz)
TRIANGLE WAVE
Amplitude: 0 - 3V at 9V DC input
Linearity: Less than 1% (up to 100kHz) 10mA
2. The Function Generator component parameter table
|
Note |
label |
type |
parameters |
|
R1 |
resistor |
1K |
Regardless of the polarity |
|
R2 |
Adjustable resistance |
B503=50K |
(by screen printing layer) |
|
R3, R5,R6 |
resistor |
5.1K |
Regardless of the polarity |
|
R4 |
resistor |
330 |
Regardless of the polarity |
|
R7 |
Adjustable resistance |
B503=50K |
(by screen printing layer) |
|
R8 |
Adjustable resistance |
B104=100K |
(by screen printing layer) |
|
C1, |
Electrolytic capacitor |
100UF |
The positive short feet negative long feet |
|
C2 |
non-polar capacitors |
104 |
Regardless of the polarity |
|
C3,C4 |
Electrolytic capacitor |
10UF |
The positive short feet negative long feet |
|
C5 |
non-polar capacitors |
105 |
Regardless of the polarity |
|
C6 |
non-polar capacitors |
473 |
Regardless of the polarity |
|
C7 |
non-polar capacitors |
222 |
Regardless of the polarity |
|
C8 |
non-polar capacitors |
101 |
Regardless of the polarity |
|
U1 |
IC |
XR2206 |
(by screen printing layer) |
|
JK1 |
DC POWER |
|
(by screen printing layer) |
|
J1 |
2PIN Jumper cap |
XM2.54 |
Regardless of the polarity |
|
J2 |
2PIN Jumper cap |
XM2.54 |
Regardless of the polarity |
|
P1 |
Signal wire terminal |
|
(by screen printing layer) |
|
J3 |
2*5P Jumper cap |
|
|
3．The welding installation considerations, follow these steps:
1. The components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.
2.Welding IC socket, terminal blocks, finally power socket, adjustable potentiometer.
3.The back with a diagonal cutting pliers to cut short the pins as far as possible
4．Debugging steps:
1．After completion of welding on IC, XR2206, pay attention to the direction of IC, insert the might damage the chip!
2. check the IC whether against, such as anti please timely correction.
3. Insert the power supply, power supply for 5.5 * 2.1 port, inside outside is negative polarity. For 9-12 v power supply voltage. The waveform may not be stable for more than 12 v
5．Using the step：
1. J1 jumper cap plug in, SIN/TRI blue terminals output sine wave (note J1, J2 can only insert one of)
2. J2 jumper cap plug in, SIN/TRI blue terminals output triangular wave (note J1, J2 can only insert one of)
3. SQU blue terminals output pulse
4. AMP : Sine wave, triangle wave amplitude adjustment
5. FINE : Frequency fine adjustment
6. Coarse : Frequency of coarse adjustment
7．Schematic diagram of Function Generator
Package Included:
1 x XR2206 Function Generator DIY Kit Sine, Triangle, Square Output 1HZ-1MHZ+CASE
Am 04.05.17 hat der Verkäufer die folgenden Angaben hinzugefügt: