Application Instructions: For small scale production, repairs and patching the repair tape can be applied using a Heat Press or Household Iron. In this case the temperature needs to be on a medium / medium hot setting - the dwell time is the important factor and this can only be determined by experimentation - suggest in the region of 6 - 10 seconds with pressure applied. Ideally apply the repair tape to a small piece of waste fabric first to test adhesion strength - after test application and allowing time for cooling pull the tape back and you should feel a strong resistance. For a good seal to be achieved the temperature must be hot enough for the adhesive to be flowing / molten and pressure must be applied across the full width of the tape.

Please note the repair tape is not bold in color. This is for technical / performance reasons - the nylon backer that carries the color has to be thin and open weave (so that the tape adheres to itself at cross-over points) and therefore the white film / adhesive shows through giving it an overall lighter shade appearance.