Description:
Acrylic Case
Acrylic Case For 6J1 Valve Preamp Tube Board Headphone Amplifier Buffer
Package Included:1× Acrylic Case ( Not Included Board )
6J1 Board Only(Welded) 6J1 Board(Kits) Only
100% brand new and high quality
Material: Plastic, Metal
Color: See pictures
1. SIZE: 77 MM * 75 MM * 52 MM
2. Power input: AC 12 V1A 5.5 * 2.5 PLUG
3. Channle: 2.0 / Stereo
4. Potentiometer Function: Volume + Power Switch setting
Specification:
FE-6J1-2 tube fever plate pre-amp is the circuit schematic imitation design team Music fax X-10D, to be rational optimization, more stable performance than the original machine, 10% tube set increase. This board uses a single 12 V AC input battery, the processing circuit provides 6J1 tube required positive and negative voltage and voltage supply filament voltage.
Energy works: an open tube feeding the filament heating is started, when the impulse from zero-tension start to increase the hot filament tube, etc., also happens to boost boost finish, so this is the same with the 8 * 470 UF capacitor very clean filter, good power supply system will not have a buzzing, the filament is 12 V DC power supply, needs two tube is connected in series with a DC filament filament too in order Reduce noise.
Tips: If you need a welding bome, please open this link: T12 Welding Iron Station Controller
Not Retail Package
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package included:1x Tube 6J1 Preamp Board Module Preamplifier(Welded/Kits)
6J1 Board+Case(Welded Board+Case Kits)
Package included:
1 * Tube 6J1 Preamp Board Module Preamplifier(Welded)
1 *Acrylic Case (DIY Kits)
6J1 HiFi Amplifier
Acrylic Case For 6J1 Valve Preamp Tube Board Headphone Amplifier Buffer
Package Included:1× Acrylic Case ( Not Included Board )
6J1 Board Only(Welded) 6J1 Board(Kits) Only
100% brand new and high quality
Material: Plastic, Metal
Color: See pictures
1. SIZE: 77 MM * 75 MM * 52 MM
2. Power input: AC 12 V1A 5.5 * 2.5 PLUG
3. Channle: 2.0 / Stereo
4. Potentiometer Function: Volume + Power Switch setting
Specification:
FE-6J1-2 tube fever plate pre-amp is the circuit schematic imitation design team Music fax X-10D, to be rational optimization, more stable performance than the original machine, 10% tube set increase. This board uses a single 12 V AC input battery, the processing circuit provides 6J1 tube required positive and negative voltage and voltage supply filament voltage.
Energy works: an open tube feeding the filament heating is started, when the impulse from zero-tension start to increase the hot filament tube, etc., also happens to boost boost finish, so this is the same with the 8 * 470 UF capacitor very clean filter, good power supply system will not have a buzzing, the filament is 12 V DC power supply, needs two tube is connected in series with a DC filament filament too in order Reduce noise.
Tips: If you need a welding bome, please open this link: T12 Welding Iron Station Controller
Not Retail Package
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package included:1x Tube 6J1 Preamp Board Module Preamplifier(Welded/Kits)
6J1 Board+Case(Welded Board+Case Kits)
Package included:
1 * Tube 6J1 Preamp Board Module Preamplifier(Welded)
1 *Acrylic Case (DIY Kits)
6J1 HiFi Amplifier
100% Brand New!
Color: Black
Material: Aluminum
Size: 95x100x32mm/3.7*4*1.3 inch
Power: DC12V 1A
Frequency Response: 20HZ (-0.2DB) ~ 20KHZ (-0.2DB)
SNR: 100DB
Input Sensitivity: 300 ~ 2000MV
Output: 3000MV
THD: 1000MV 0.1%
Color: Black
Material: Aluminum
Size: 95x100x32mm/3.7*4*1.3 inch
Power: DC12V 1A
Frequency Response: 20HZ (-0.2DB) ~ 20KHZ (-0.2DB)
SNR: 100DB
Input Sensitivity: 300 ~ 2000MV
Output: 3000MV
THD: 1000MV 0.1%
Features:
- J61 classic tube design, optimization line
- Tube design can be replaced
- Aluminum alloy shell, durable classic
-DC12V Power supply, it is easy to find a suitable power source
- Unique boost mode, the high voltage power supply, power supply
mode is superior to common
- Can be used with digital amplifier analog amplifier, active speakers
- J61 classic tube design, optimization line
- Tube design can be replaced
- Aluminum alloy shell, durable classic
-DC12V Power supply, it is easy to find a suitable power source
- Unique boost mode, the high voltage power supply, power supply
mode is superior to common
- Can be used with digital amplifier analog amplifier, active speakers
Note:
The size is just for reference, there maybe exist a measurement error, please check carefully before you buy it.
Color may vary slightly due to different calibration of each monitor.
Color may vary slightly due to different calibration of each monitor.
Package Included:
1 x HIFI preamp
2 x Tube
2 x Tube
Am 10.05.17 hat der Verkäufer die folgenden Angaben hinzugefügt: