* High Quality A/V MOD PCB Board.
* 2N3904 SMD Transistor Soldered to PCB Board.
* 3.3k - SMD Resistor - Machine Soldered to PCB Board.
* 2.2k - SMD Resistor - Machine Soldered to PCB Board.
* 75 ohm 1% High Tolerance Blue Metal Film Mini Resistor (Most Kit's Do not Include This Resistor Guarantees 75 ohm signal to your TV) soldered to PCB Board.
* Piece of 3M VHB Heavy Duty Double-Sided Foam Tape Installed on Bottom of PCB Board.
* 22/4 Solid Copper Wire Soldered to PCB Board 20+ inches. * Red, Black, Blue, Yellow Wire Color.*
* 6 inch Piece Heat Shrink Tubing.
* SET OF 3 - RCA JACK'S.( Yellow, White, Red ) **DO NOT OVERTIGHTEN RCA JACKS** Make Snug Tight Just enough to prevent Movement of RCA Jack.
* NO INSTRUCTIONS INCLUDED !!! Internet Search - Atari 2600 Video Mod Installation Guides
* There are Plenty of Great sites on the Internet and YouTube Video's are Very Helpful for guiding you through the Easy Installation Process..
* Over 5000 A/V Mod Kit's Sold !!!
* If you need a Site for Instructions Search Internet..Atari 2600 Video mod Installation Guides
* You will Need How to De-solder and Solder and Have General Electrical Knowledge.
* If Not Sure Have a Professional Install Kit.* Three 1/4" Holes must be Drilled in case for the RCA Jack's.
* NO Tool's ,Solder ,De-soldering Braid,Etc.are Included*****
* Make Sure Your Unit is Working Properly Before Installation.
* I am NOT RESPONSIBLE for any Damage done to YOU or Your UNIT
Before or After Installation of this Kit.
* Other Kit's Available in my Store.
* Tune-Up Kit's Also Available for all 2600 Model's.
* Will Ship in a box with bubble wrap and in an anti-static bag so no damage occurs.
* SUPER FAST SHIPPING !!!!
* 2N3904 SMD Transistor Soldered to PCB Board.
* 3.3k - SMD Resistor - Machine Soldered to PCB Board.
* 2.2k - SMD Resistor - Machine Soldered to PCB Board.
* 75 ohm 1% High Tolerance Blue Metal Film Mini Resistor (Most Kit's Do not Include This Resistor Guarantees 75 ohm signal to your TV) soldered to PCB Board.
* Piece of 3M VHB Heavy Duty Double-Sided Foam Tape Installed on Bottom of PCB Board.
* 22/4 Solid Copper Wire Soldered to PCB Board 20+ inches. * Red, Black, Blue, Yellow Wire Color.*
* 6 inch Piece Heat Shrink Tubing.
* SET OF 3 - RCA JACK'S.( Yellow, White, Red ) **DO NOT OVERTIGHTEN RCA JACKS** Make Snug Tight Just enough to prevent Movement of RCA Jack.
* NO INSTRUCTIONS INCLUDED !!! Internet Search - Atari 2600 Video Mod Installation Guides
* There are Plenty of Great sites on the Internet and YouTube Video's are Very Helpful for guiding you through the Easy Installation Process..
* Over 5000 A/V Mod Kit's Sold !!!
* If you need a Site for Instructions Search Internet..Atari 2600 Video mod Installation Guides
* You will Need How to De-solder and Solder and Have General Electrical Knowledge.
* If Not Sure Have a Professional Install Kit.* Three 1/4" Holes must be Drilled in case for the RCA Jack's.
* NO Tool's ,Solder ,De-soldering Braid,Etc.are Included*****
* Make Sure Your Unit is Working Properly Before Installation.
* I am NOT RESPONSIBLE for any Damage done to YOU or Your UNIT
Before or After Installation of this Kit.
* Other Kit's Available in my Store.
* Tune-Up Kit's Also Available for all 2600 Model's.
* Will Ship in a box with bubble wrap and in an anti-static bag so no damage occurs.
* SUPER FAST SHIPPING !!!!
*** IF MODDING A 7800 UNIT LEAVE A MESSAGE AT CHECKOUT FOR POKEY 6.8K SEI RESISTOR + 12" Wire. Make sure you hit the ADD BUTTON on message box or it will not be saved..**7800 Mod kits are also Available in the store.**
* Fully Assembled Kit's Tested For 24Hrs Straight Before Shipping!!!!!!
* Fully Assembled Kit's Tested For 24Hrs Straight Before Shipping!!!!!!
** NOT COMPATIBLE WITH THE NEW ATARI+ PLUS.... **
*FULLY ASSEMBLED
