Micron Superior Type-||

Product Description


Expiry-10/2019

Highlights:
  • DIY High Strength Permanent Filling Kit
  • Class I and class II restorations in deciduous & permanent teeth
  • Suitable for instant permanent fillings, bridges & caps
  • Self Curing, self adherent & Universal shade, Long Expiry 2019
  • 15 gm Powder + 10 ml Liquid + Mixing pad + Measuring Spoon + Mixing Spatula + Leaflet for instructions

Micron Superior is a radiopaque Glass Ionomer Cement for restoration of primary teeth core build up and restoration of class III, V and limited class I cavities.

Composition Powder consists of calcium- alumino-flurosilicate glass. Liquid is 50% polyacrylic acid

Direction for use: Shake the powder bottle well every time before use., Dispense one scoop of powder and two drops of liquid on to the mixing plate (The standard powder to liquid ratio is 1.5g:1g). With a plastic spatula, divide the powder into 2 equal parts. Mix the first portion with all of the liquid for 10 seconds. Mix the remaining portion with the paste formed for 20 seconds. The total mixing time should be 30 seconds. Transfer cement to the prepared tooth surface using suitable placement instrument and finish the restoration. Allow 5 to 6 minutes for proper setting. 

Warning: Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally

Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components

Contra Indications 1. Pulp Capping 2. In rare cases, the product may cause sensitivity to some persons. If such reactions are experienced, discontinue the use of product and refer to a physician. 
Storage & Shelf Life Store at temperature below 25°C Close the Container carefully after use. Keep Away from Moisture. Shelf Life not affected after opening if stores in a cool dry place. If not to be used for a longer duration, keep them in refrigerator. Allow material to reach room temperature prior to use 

Shelf Life : 3 years. 
Caution: In case of contact with oral tissues or skin, remove immediately with a sponge or cotton soaked in alcohol Flush with water. In case of contact with eyes, flush immediately with water and seek medical advice

Packaging 1 x 15g Powder Jar, 1 x 10ml Liquid Bottle, 1 x Mixing Pad, 1 x Spoon. Disposal conditions: To be disposed off based on the prevailing rules of the country in which it is used 

  • Cementation of inlays, onlays and crowns.
  • Cementation of posts and screws.
  • Attachment of metal orthodontic bands.


  • High fluoride release.
  • Low solubility.
  • Translucent shade.
  • Very low film thickness.
Packing Detail: 
  • Powder -Liquid Kit.
  • 1 X Powder Jar 15g. 
  • 1 X Liquid Bottle 10ml.
  • 1 X Mixi

Disclaimer:

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration

 and state and local regulatory agencies. 

If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation,

 I will verify your status as an authorized purchaser of this item before shipping of the item. 

Contact info:

Dentbear

Whatsapp-+918097995747

Contact:


City: Delhi


Country: India


Whatsapp number: 91-8097995747