eBay

Custom manufactured film holder for Super 8 mm and Regular 8 mm movie film (Patent Pending). This model is designed for use with Epson Perfection v100,v200,v300,v330,v370 flatbed film scanners. Please inquire about customization options for other scanner models. Please note that this will not work with regular flatbed scanners that do not feature the backlight necessary to scan negatives and films. 8 mm film was created in the 1920s and quickly became the most popular home movie format. Usage of 8 mm film lasted well in to the 1980s until VHS cameras finally became affordable. 8 mm film is still manufactured and continues to have a niche with film students.

A few notes about scanning 8 mm film: 8 mm movie film was never intended to be used (and subsequently scanned) as a still photo format. The frames are extremely small and you cannot expect to extract an image of the same quality you could from a 35 mm film. This is a newly designed model that finally allows for full frame 8 mm scanning. It features two cut out sections as displayed in the photos above. The two sections that are borderless are 38.5 mm in length. If full frame scanning isn't critical to your needs, you can scan the entire frame all at once. For those frames where you want to capture the entire image, you align those images in one of the two borderless areas.

Important: Our film adapters for flatbed scanners are not designed to be used with uncut filmstrips. You may need to cut your film to adapter length for proper use.

Specifications:

Outside dimensions: 200 x 55 mm
Scanning window: 190 x 6.70 mm
Material: Solid plastic
Features: Unlike some models, this holder features a recessed film channel that holds your filmstrip firmly while also helping avoid scratches.

Visit My eBay Store: Negative Solutions

SPECIAL NOTE FOR INTERNATIONAL BUYERS: Ebay has recently changed rules for international buyers. If you are buying multiple items from the same seller you can no longer combine shipping. Ebay will also require you to pay immediately so I am not able to send you an invoice for combined shipping. Unless something changes (or unless you know of a way to combine shipping that I haven't found yet), your only option is to buy and pay for each item separately. This will likely result in overpayment of shipping charges. I always refund overpayment of combined shipping charges, but unfortunately Ebay charges sellers a 10% commission on the original shipping charge and will not refund the difference. I will continue to refund overpayment of shipping on multiple items, but in the future I will have to deduct the 10% commission that Ebay sticks me with. I apologize for the inconvenience. Hopefully Ebay will change this practice soon!

Important additional notes:

- If you are buying my holders for resale, please be aware that my products are more about "function" over "form." This is why they are so inexpensive compared to other commercially produced options. Each holder is custom made and may contain spot sanding and other finishing marks. I do my best to clean my products up cosmetically, but due to sales volume I simply can't spend a lot of time on it. My main concern is that it works like it is supposed to. As a result, if you are reselling please be aware that you may need to do some more finishing work suitable for a retail environment.

- Aftermarket holders for odd film sizes will usually require the ability to manually scan film strips with "thumbnail" modes turned off. Depending on your model and software, masking of individual frames for scanning may be necessary for the best results. Please ensure you know how to set your scanner/software for full manual control. Simply pushing a green button on the front of your scanner (common with Epson models) to scan a film strip will not work with most aftermarket film holders.

- Please pay particular attention to the "handling" days before shipping as noted above. I do not typically maintain an inventory of my film holders as most are custom made upon order placement. As such, I ask for 5 business days handling before shipping. My average is likely around 2 days, but there are occasions where orders are very high and I may need all 5 business days before I am able to ship your holder. Please keep this in mind.