eBay

This is an APS film format negative holder for use with the ION, JUMBL, Wolverine, Digitnow!, Magnasonic + more scanners (Patent Pending). See below for full compatibility list. This was CAD designed and manufactured for use with the obsolete APS film format that was briefly popular in the 1990s. Unfortunately not only is it almost impossible to get prints made from APS film these days, but APS negative holders are hard to come by and the ones that you can find cost upwards of $100. Additionally, while many film scanners allow for negatives to be scanned directly on the glass, APS presents a special issue because it's stored wound tightly inside the film canister. Once you get it out of the canister, the negatives roll in to a ball unmercifully without something to hold them flat. Removing exposed negatives from an APS canister is actually quite easy. You literally break it out any way you can. Since APS canisters are plastic, I use a pair of pliers to gently crack open the canister to gain access to the negatives. If you don't want to destroy your APS canister, there are commercially available products known as "film retrieval tools" that will work for APS. I am also told that it is possible to use a small flat screwdriver to open the canister film door and then use the screwdriver to turn the canister center spindle to make the film eject for scanning.

Specifications for the APS negative holder:

Overall: 217 x 64 mm
Material: plastic
Assembled thickness: 6.3 mm
Features: Unlike some designs, this holder features a recessed channel to hold your negative strip firmly which can help avoid scratches or trapped dust that other holders may cause.

Full Compatibility List:

ION PIC2SD (NOT PIC2SD Plus)

ZONOZ FS-ONE

FS-THREE

Wolverine SNAP-14 Red

Wolverine SNAP20

Wolverine SNaP100 Red

Wolverine F2D Super Green

Wolverine F2D Super Yellow

Wolverine F2D8 Red

Wolverine F2D100 Black

Wolverine F2D Red

Wolverine F2D20 Red/Orange

Wolverine F2D30 Blue

Wolverine F2D Mighty White

Wolverine F2D Mighty Orange

Wolverine F2D14 Green

Jumbl 22MP

Digitnow! 22MP

Digitnow! 5MP

DigitNow! M125

DigitNow! M123

ClearClick 20MP

ClearClick 22MP

ClearClick F2USB-05

Rollei DF-S

Magnasonic 22MP

SainSonic FS-02 35mm Slide Converters

SPECIAL NOTE FOR INTERNATIONAL BUYERS: Ebay has recently changed rules for international buyers. If you are buying multiple items from the same seller you can no longer combine shipping. Ebay will also require you to pay immediately so I am not able to send you an invoice for combined shipping. Unless something changes (or unless you know of a way to combine shipping that I haven't found yet), your only option is to buy and pay for each item separately. This will likely result in overpayment of shipping charges. I always refund overpayment of combined shipping charges, but unfortunately Ebay charges sellers a 10% commission on the original shipping charge and will not refund the difference. I will continue to refund overpayment of shipping on multiple items, but in the future I will have to deduct the 10% commission that Ebay sticks me with. I apologize for the inconvenience. Hopefully Ebay will change this practice soon!

Satisfaction is guaranteed!

Visit My eBay Store: Negative Solutions

Important additional notes:

- If you are buying my holders for resale, please be aware that my products are more about "function" over "form." This is why they are so inexpensive compared to other commercially produced options. Each holder is custom made and may contain spot sanding and other finishing marks. I do my best to clean my products up cosmetically, but due to sales volume I simply can't spend a lot of time on it. My main concern is that it works like it is supposed to. As a result, if you are reselling please be aware that you may need to do some more finishing work suitable for a retail environment.

- Please pay particular attention to the "handling" days before shipping as noted above. I do not typically maintain an inventory of my film holders as most are custom made upon order placement. As such, I ask for 5 business days handling before shipping. My average is likely around 2 days, but there are occasions where orders are very high and I may need all 5 business days before I am able to ship your holder. Please keep this in mind.