|
EE Malleable Iron Fittings Our Whiteheart Malleable Cast Iron Pipe Fittings brand EE are used in threaded pipe connections, particularly: ✓in water supply systems ✓gas and steam systems ✓central heating systems ✓sprinkler systems ✓to convey non-aggressive liquids and gases. THE BEST MALLEABLE CAST IRON FITTINGS:In order to ensure you the qualtity of the products, every single fitting is exmined,tested and certified before despatch to ensure the best products for your needs. Several International Certifications can guarantee the high quality of our pipe fittings: ✓ISO 9001 ✓DVGW ✓ISO 14001 ✓and much more… Furthermore we have a product Liability Insurance for all Malleable Cast Iron Fittings ADVANTAGE OF EE MALLEABLE IRON FITTINGS The chemical constitution of our pipe fittings is the result of the work of the best specialists during the last decades. Our Malleable Cast Iron Fittings have notable features specially: ✓they are heavier than standard pipe fittings ✓they have good abilities with vibration damping and good thermal expansion ✓they do not tear off during assembling We design our structural documentation by using the Solid Works software and we create the simulation of the pouring into moulds process and the solidification process by using modern MAGMA software. All our Malleable Cast Iron Fittings are 100% tested for leak tightness under the pressure of 5 bars. MATERIAL Fittings: white malleable EN-GJMW-400-5 cast iron, according to EN 1562, equivalent to W 40-05 ,according to ISO 5922. material z 2a SURFACE/ZINC PLATING EE brand fittings can be supplied in accordance to order: with black or galvanized surface According to EN 10242, zinc oating weight relative to the surface exceeds 500 gr/m², which corresponds to an average layer thickness of 70micron. Both black and galvanized surfaces are protected against corrosion. Corrosion protection substance does not contain polycyclic aromatic hydrocarbons. OPERATING PRESSURE Our Malleable Iron Fittings can perform at the highest admissible working pressure and temperature ranges quoted in the left table. Constructional symbol A is characterized by the following material: whiteheart, malleable cast iron EN-GJMW-400-5. 2.5 MPa/25 bar/ at the temp. from -20°C to 120°C 2.0 MPa/20 bar/ at the temp. of 300°C LEAK TEST According to EN 10242, each EE brand fitting is subjected to a leak test at air pressure of at least 0,5 MPa / 5 bar, which is equivalent to a minimum hydrostatic pressure of 2.0 MPa / 20 bar/.
MORE FITTINGS CAN BE FOUND ON THE WREKIN PNEUMATICS ONLINE SHOP Payment methods:
A VAT Receipt is supplied with this item.
|