Test SOT23 Surface Mount Components with your Peak tester or Multimeter
This beautiful SOT23 test adapter is designed to complement your DCA55 or your DCA75 (or any other semiconductor tester). It's extremely easy to use thanks to the special spring-loaded SOT23 socket assembly. Your SOT23 part is gently and securely held against gold plated sprung contacts with a carefully controlled contact force.
The adapter is designed to look like a giant SOT23 part, so it's easy to visualise the pinout of the part inside when using the DCA55 or DCA75.
The unit is supported on 4 non-slip feet which also serves to keep the unit slightly raised from your work surface allowing for easier connections using micro-hooks or croc clips.
The large area gold plated pads are also great for multimeter prods.
| Suitability | SOT23 3 pins |
| Max current capability | 100mA |
| Max voltage capability (1) | 50Vac, 75Vdc |
| SOT23 contact material | Gold flash |
| SOT23 contact resistance | <10mΩ |
| Test pad contact material | Gold flash |
| Pad-pad track resistance (2) | <20mΩ |
| Temperature Range (3) | -34°C to 65°C -55°C to 155°C |
| Weight | 13 grams |
| Dimensions | 50 x 60 x 17mm |
Notes:
(1) To comply with Low Voltage Directive 2006/95/EC.
(2) Measured between both "red" pads, or both "green" pads, or both "blue" pads.
(3) Temperature range of -34°C to 65°C limited by polyethylene feet. Limit of the rest of the assembly is -55°C to 155°C.
Please note this sale is for the adaptor only - any test equipment shown in the pictures is for illustration purpose only.
VAT Invoice and domestic shipping (UK only) included with purchase, please do not discard invoice with packaging.