Wireless Pro Game Controller for Switch

Preface

Thank you for choosing our product. For bringing you with pleasant gaming experience, please read this user guide and all safety instructions carefully to ensure safe and proper use.
The instructions in this user guide are based on the default settings of the device.
All pictures, statements and text information in this guide are for references only, actual product prevails; Updates are subject to change without prior notice and
it will be edited in a new version guide, we reserve the right of final interpretation.
Available functions and additional services may vary due to different devices, software or service providers.

Controller features

  • This Pro controller is compatible with Switch console (wireless or USB cable) also supports Windows PC (USB cable).
  • Wireless connection (Switch console), lower interference, stable connecting signal.
  • One-key connecting mode for ease of handling.
  • Built-in with 380mAh polymer lithium battery, it can be continuously used for
  • around 5h after fully charged.
  • It supports motion sensing function via built-in Gyro; supports double-shock
  • function via built-in dual motors; supports TURBO function.
  • Up to four wireless Pro controllers can be connected to a Switch console
  • simultaneously.
  • It can be used normally even during charging.
  • Ergonomic design and light weight construction make it comfortable even for
  • long hours of continuous gaming.
  • It can be upgraded by update software via connecting it to PC.

Key brief introduction
  • HOME key: Power controller on or execute commands from Switch console.
  • D-Pad: Up, down, left and right. It can be easily operated on eight directions.
  • Function control keys: A, B, x, Y. Perfect key design, sensitive and quick for
  • finger operation.
  • Left stick and Right stick: Neoteric 3D stick can be operated precisely on 360°
  • all-round.
  • Functional keys: L1, R1, L2, R2. Trigger and shoulder keys perform quick response function.
  • Screenshot key: Take screenshot and store. press and hold any key of the function keys (AVBIXNYIL1/
  • TURBO key: R1/L2/R2) then press First "TURBO" key once to repeat and accelerate action in a game. Press "TURBO" key once again to cancel the repeating and accele-rating function.
  • Reset key: Short press this key in "RESET hole to disconnect controller from console and reset the controller
Connection instruction
Connecting to Switch Console via wireless

A. Connecting to a Switch console for the first time Power on a Switch console, on the main interface of the console click (by using your finger) Cntolrs一"Change Grip/order' to come to paring mode interface; press "HOME key and hold for 4s to power a controller on, four LEDS in the controller start blinking slowly and circularly then blinking quickly and circularly after 4s, when one (or more) of the four LEDS is solid bright, it means that the controller is paired with the console successfully; press “B" key to return to the main interface of the console.

B. Connecting to a paired Switch console: If a controller was paired with a Switch console ever before, just press HOME key shortly to power the controller on, the controller will be connected to the console automatically again.
C. Connecting controller back to Switch console: 
  1.       If a controller is in sleeping mode, press "HOME" key shortly to wake itup, it will be connected to the console again automatically.
  2.       If a Switch console is in sleeping mode, first press the power button of the console to wake the console up then shortly press "HOME" key of the cont-roller to connect it back to the console (If a Switch console is in sleeping mode, the console can't be woken up by directly pressing any key of the controller.).

2) Connecting to Switch Console via USB cable
On the main interface of a Switch console, click "Settings"→"Controllers and Sensors" - + "Pro Controller Wired Communication" -，"ON" to open Pro cont-
roller wired connection; connect a controller to the USB port of the console holder through a USB cable, LED 4 in the controller starts blinking slowly then LED 1 in the controller will be blinking slowly after the controller is connected to the console.

3) Connecting to Windows PC via USB cable
First you need to download the X-360 driver and install it on your Windows PC. Connect the cntololer to the Windows PC via aUSB cable The fourLEDs in the cnoor start to lash slowly, and then the controlor diver is aumatcilly isatalel to the PC. The coreponding LED will lash slowly and the controller can be used. Support for X-360 mode games. The X-360 driver is avilable on the internet.

Note: With vibration function but without motion sensing function under X-360 mode wired connection.


LED indication description

  1. Four LEDS binking quickly and cruiarlr; This controlor is searching for wreles devices to be paired; this controller is connecting back to console via wireless code match.
  2. LED[() solil bright: This cntrllorl is cnnecting to console nomally via wrelesss
  3. LED(s) blinking quickly: This controler battery vltage is lower than 3.6V; if the vllage is lower than 3.4V, the controller will be shut off atomaically and can't be powered on.
  4. LED(s) blinking slowly: This controler is connecting to console via USB cable; when this controller is being charged via connecting to a charger, four LEDS are blinking slowly and simultaneously. the four LEDs will be off after fully charged.