Features:4.3" Color TFT LCD Car Foldable Rearview MonitorIt with 2 video input, works perfectly with car rearview cameras, supports car backup camera/DVD/Serveillance camera/STB/Satellite receiver/other video equipmentsFeatures:4.3 inch High-resolution Color TFT LCD monitorFoldable and portable, Easy to installFull color TFT LCD display, Low power consumptionWith 2 road video input port, white video cable connects to car rearview camera, the yellow one connects to DVD or VCD, White video cable is priority signal input, when 2 road has signal input, the machine will prioritize the white end signalSupports Car Backup Camera, DVD, VCD, STB, Satellite receiver, and other video equipmentsNo Audio input or output
Car Rear View CameraProfessional exterior waterproof car rear view cameraSmall compact sizeLow power consumptionLow maintenance7 infrared night vision LEDEasy to install and operatePerfectly solve the issue of bad car rear view effect
Wireless 2.4GHz transmitter/receiver100% brand new,High qualityEasy installationTake one minute get your camera become a wireless cameraConvert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kitEliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor endThe transmitter also includes a handy pass through for the power so you can connect it inline with your cameraWireless transmitter with male phono plug and male 3.5mm power plug for supplying power to the cameraWireless receiver with male phono plug for connection to monitorSpecification:4.3" Color TFT LCD Car Foldable Rearview MonitorScreen size: 4.3 inchResolution: 480 x 234Standard: PAL/NTSCVideo in: AV1/AV2Aspect Ratio: 4:3Power Supply: DC 12VBrightness: 300 nitsColor: BlackHousing: ABSPackage Size: 150 x 117 x 72mmPackage Weight: 286g
Car Rear View CameraSensor: PC1030 1/4 Inch Color CMOSTV system: NTSCEffective pixels: 628 X 582 pixelsScanning System: 2:1 InterlaceSync System: InternalResolution: 420 TV linesLens Angle: 2.8mm/120°- 1.8mm/170°Sensor Area: 5.961mm x 4.276mmVideo Output: 1.0 VP-P,75 OHMS/N Ratio: More than 48dbWater-proof: IP67-IP68Minimum 111umination: 0.2Lux/F1.8(0 Lux with LED)Vurrent Consumpition: No more 300mAPower supply: DC 12VOperationg Temperature: -20℃-60℃(RH95%Max.)Storage Temperature: -30℃-60℃(RH95%Max.)Other Items: Auto matic white balance. Agc and BLC
Wireless 2.4GHz transmitter/receiverWireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)Work Range:Up to about 10m(Hollowness)Connects to rear-view camera and front video screenFit all RCA composite video connectionsPower: DC 12VTransmitter/Receiver Cable Length:1.4mProduct Weight: 90gHow to use it :Take out your stock license plate light at the back of your carFix the camera to where the stock license plate light wasConnect the built-in license plate light of the camera to where the stock license plate light was connected to get the powerConnect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for powerConnect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negativeConnect the wireless module (receiver) to your car monitor - yellow plug for AV inputConnect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negativeYou will see the images when your car is in reverse shift