This item is new, in box!
With your purchase you will receive 2 new Hosa IRG100.5 flat patch cables!
I am an Authorized Dealer, a store receipt will be included with your purchase.
International orders: Please note that you will be responsible for any applicable customs fees or import taxes!
Check my feedback and bid with confidence!
The 1 SPOT
Pro Story
For many
years, Truetone has made musicians’ lives easier with the 1 SPOT, the original
compact pedalboard power supply. It works so well that a lot of musicians never
felt the need to get one of those brick-style power supplies, and we here at
Truetone didn’t see the need for those either, even though they were quite
popular. Bob Weil, the founder of Truetone, explains:
“A lot of
people over the years had told us that we should make a power brick. Even some
of my own staff urged me to do it, but I didn’t want to for two reasons. First,
I knew the 1 SPOT could power just about every pedal out there, so I didn’t see
the need. Second, I didn’t want to make just another knock-off of someone
else’s power brick. If we were going to make one, we were going to do it our
way and have features that nobody else could offer. As pedal designs changed
and it became more common for digital pedals to require isolation and for
others to need something other than 9Vdc, I finally saw a reason for us to
design a power brick.”
“It took 3
years and lots of experimentation, but we were finally able to design a 1 SPOT
Pro, using our own proprietary technology to give musicians all the features
they need for today’s pedalboards. The original 1 SPOT still works great for
most musicians, but for those who need more power and versatility, the 1 SPOT
Pro fills the need perfectly.”
Introducing
the Low-Profile CS6
Following on
the tremendous success of the 1 SPOT Pro CS7 and CS12, Truetone presents the
most powerful slim line power supply in its class, the 1 SPOT Pro CS6.
Utilizing the energy efficient technology found in all 1 SPOT’s, the CS6 is the
first low-profile power brick to be able to put out up to 1600mA of pure,
silent power.
Just like
its bigger brothers in the 1 SPOT Pro line, the CS6 has a variety of DC
voltages available to power just about any pedal on the market. Each output is
completely isolated, regulated and filtered, eliminating crosstalk and noise.
With no big transformer to hinder their performance, proximity noise is not an
issue with any 1 SPOT Pro.
The
low-profile design of the 1 SPOT Pro CS6 allows it to be mounted under flat
pedalboards like the Pedaltrain® Nano and Metro series. However, the compact
design is also perfect for mounting on top of pedalboards, serving the dual
role of a power supply and pedal riser.
Dimensions
88 x 160 x
31mm (3.46 x 6.30 x 1.22”); 590 grams (1.3 lbs.) - weight and dimensions of
power supply only, not including cables or packaging.
Input
Voltage
The 1 SPOT
Pro CS6 can be used anywhere in the world without the use of a step-up or
step-down transformer. Like our 1 SPOT, it transforms wall voltage from
100-240Vac, and converts it into the stated voltages on the bottom of the unit.
The 1 SPOT
Pro CS6 includes a generous assortment of cables and converter plugs. The
cables are of various lengths, color-coded for easy cable management and with
right angle plugs on the pedal end.
Power cables
(all are center pin negative polarity):
1) DC26
(5.5x2.1mm barrel plugs; 26” (660mm) – Purple
(1) DC22
(5.5x2.1mm barrel plugs; 22” (559mm) – Blue
(1) DC18
(5.5x2.1mm barrel plugs; 18” (457mm) – White
(3) DC12
(5.5x2.1mm barrel plugs; 12” (305mm) – Yellow
(1) MC2 Two
5.5x2.1mm barrel plugs with 5.5x2.1mm input socket.
Converter
Plugs:
(1) CL6 –
(5.5x2.1mm barrel input, 5.5x2.5 barrel output; reverse polarity)
Green – for
Line 6 DL4/M9/etc. and some Eventide pedals.
(1) CYR –
(5.5x2.1mm barrel input, 5.5x2.1 barrel output; reverse polarity)
Red –
reverse polarity converter
(1) C35 –
(5.5x2.1mm barrel input, 3.5mm male output; tip positive)
Black –
3.5mm (1/8”) plug converter
(1)CBAT – (5.5x2.1mm barrel input, Black
battery clip output) Connects to battery clip wires inside pedals that do not
have DC jacks. Do NOT connect to a battery!
Outputs 1-2:
9VDC (500mA)
Outputs 3-4:
9VDC or 18VDC (100mA)
Outputs 5-6:
9VDC or 12VDC (200mA)
Can the 1
SPOT Pro power my pedal?
That
question can best be answered by looking at the following questions and notes…
Which output
and settings do I use for my pedals?
It is important
for you to know the power requirements for your pedal. For every pedal that you
are going to power via the 1 SPOT Pro CS6, you need to know the following:
What is the
voltage required by the pedal?
Does the
pedal require AC or DC voltage?
What is the
polarity of the pedal? (Center pin positive or negative.)
These
questions can usually be answered by:
1.
Inspecting the pedal itself near the power jack.
2. Referring
to the owner’s manual.
3. Checking
online, or contacting the manufacturer
4. If your
pedal can be powered by a 9Vdc battery, it can be powered by one of the 9Vdc
outputs ( an exception being the Boss ACA pedals, see below).
Notes on
using certain pedals with the 1 SPOT Pro CS6:
Some older
Boss pedals require 12Vdc, yet can be powered by a 9Vdc battery. They will
indicate “Use ACA adaptor” near the power jack. To power an ACA pedal please
use outputs 5-6, and set to 12Vdc on the DIP switch for the corresponding
output. Modern Boss pedals will indicate “PSA,” and can be powered by any of
the CS6’s 9Vdc outputs.
Many
germanium based fuzzes and Octavia-style pedals will require the use of the CYR
adaptor to reverse the polarity to center pin positive.
For pedals
with high milliamp draws such as Strymon, please utilize outputs 1 or 2 that
produce 500mA each.
Eventide
pedals such as the Time Factor and H9 may be powered by outputs 1 or 2 with the
addition of the CL6 converter, for proper DC jack tip size and polarity.
Line 6 M5
may be powered by outputs 1 or 2.
Line 6 M9,
and the modeling pedals (DL-4/MM-4), may be powered by outputs 1 or 2, and will
also require the CL6 converter.
Line 6 Tone
Core pedals may be powered by any 9Vdc output.
Line 6 POD
or M13 cannot be powered by the 1 SPOT Pro CS6.
If more 9Vdc
pedals need to be powered, an MC5 daisy chain (sold separately) may be plugged
into any of the 9Vdc outputs depending on mA draw. For adding one more pedal,
use the included MC2 cable.
Pedals that
do not utilize a power jack, yet are powered normally by a 9Vdc battery, may
utilize any 9Vdc output, along with the CBAT converter.
TC
Electronic Nova pedals may be powered by outputs 5-6 in the 12Vdc position.
TC
Electronic Classic and Tone Print series may be powered by any 9Vdc output.
Digitech
Whammy: Versions 1-4 cannot be powered by the 1 SPOT Pro CS6. Version 5 or
Whammy DT may be powered by outputs 1 or 2.
Radial
Tonebone 15Vdc pedals can be powered by a 18Vdc output, using the Reverse
Polarity Converter (CYR) included with the 1 SPOT Pro.
Note:
Outputs can each handle more than the stated mA number. However, it is
important to never exceed the max. current rating of all outputs
simultaneously.