M.NT68676.2A(HDMI+DVI+VGA+Audio)
LCD/LED Screen Controller Driver Board
Diy Monitor Kit for LM240WU2(SL)(B1)
LCD/LED Screen Controller Driver Board
Diy Monitor Kit for LM240WU2(SL)(B1)
This is a great set of easy-reassembling
LCD controller kit which is used to
turn a bare LCD panel into a desktop/PC
monitor. It will be a surprise that your
bare LCD will be of good use, and no
longer be a waste. Or it is a very insteresting
things that we make a monitor
successfully by ourselves.
Necessary Accessories for making
LM240WU2(SL)(B1) work :
1.LCD Controller board
2.LVDS cable
3.Keypad
4.VGA cable/DVI Cable/HDMI cable (not included)
5.Power Adapter (not included)
M.NT68676.2A is a monitor control board, which can
support LED/LCD panels.It can support resolution up
to 2048X1152.
M.NT68676.2A can synchronize with computer
automatically. Synchronization
requires the synchronous signal which horizontal
and vertical sync are separated.
M.NT68676.2A can support dynamic contrast control, headphone
input and
digital volume control simultaneously.
Size of controller board: 139mmX58mmX17mm
Connection method
Notes:
1. Please make sure that your LCD is ok before bidding
this item,else you will be responsible for the incompatibility.
2. If you are not specialized in electronics or have doubts
in operation,please contact us for instruction, as
we are not able to responsible for wrong operation.
3. If you pay much attention on resolution setting,
please reconsiderbefore placing the order.
No metal contact is allowed.
1. Take away the old inverter and old LVDS
cable from the LCD panel.
2. Connect the new inverter and new LVDS
cable to your LCD panel.
3. Connect controller board kit to the PC
with VGA cable/DVI cable/HDMI cable.
4. Input power of 12V,3A. ( Please don't revised
the voltage jumper setting on the
lcd controller board before confirmation from us,
because wrong revising of this voltage will get
your lcd burnt. By the way, please
don't connect the lvds cable wrongly, some wrong
connection can get your lcd burnt too,
if you are not sure, please feel free to contact us.)
if you need buy the adapter power , please tell us
LCD controller kit which is used to
turn a bare LCD panel into a desktop/PC
monitor. It will be a surprise that your
bare LCD will be of good use, and no
longer be a waste. Or it is a very insteresting
things that we make a monitor
successfully by ourselves.
Necessary Accessories for making
LM240WU2(SL)(B1) work :
1.LCD Controller board
2.LVDS cable
3.Keypad
4.VGA cable/DVI Cable/HDMI cable (not included)
5.Power Adapter (not included)
M.NT68676.2A is a monitor control board, which can
support LED/LCD panels.It can support resolution up
to 2048X1152.
M.NT68676.2A can synchronize with computer
automatically. Synchronization
requires the synchronous signal which horizontal
and vertical sync are separated.
M.NT68676.2A can support dynamic contrast control, headphone
input and
digital volume control simultaneously.
Size of controller board: 139mmX58mmX17mm
Connection method
Notes:
1. Please make sure that your LCD is ok before bidding
this item,else you will be responsible for the incompatibility.
2. If you are not specialized in electronics or have doubts
in operation,please contact us for instruction, as
we are not able to responsible for wrong operation.
3. If you pay much attention on resolution setting,
please reconsiderbefore placing the order.
If the picture is not clear, please follow the steps below.
Step1：
Make sure the AD borad has signal and
power.
Press "Power" key to power
down the machine .
Step2：
Keep one hand pressing the "Menu"
key, then
another hand press
the "Power" key to power up the machine.
Release both hands when the machice is
totally start up. There will be a factory
menu on
the top-left corner.
Step3
Use the “Up”or“Dwon”key to choose the
"LVDS MAP"
item. Then press
"Menu" key to select it, change
the valve untill the
picture is ok. Repower and
check
Chinese changed to english
1. Press the menu
first,
2. Then press RGHT
3. Press the two menus again
No metal contact is allowed.
1. Take away the old inverter and old LVDS
cable from the LCD panel.
2. Connect the new inverter and new LVDS
cable to your LCD panel.
3. Connect controller board kit to the PC
with VGA cable/DVI cable/HDMI cable.
4. Input power of 12V,3A. ( Please don't revised
the voltage jumper setting on the
lcd controller board before confirmation from us,
because wrong revising of this voltage will get
your lcd burnt. By the way, please
don't connect the lvds cable wrongly, some wrong
connection can get your lcd burnt too,
if you are not sure, please feel free to contact us.)
if you need buy the adapter power , please tell us