Jamis Defcon 2 Enduro Dual Shock 27.5" 650b Tubeless Mountain Bike 19" Reduced from $3799.00
If
you're looking for an incredible deal on an enduro bike that may be
more monster than bike, look no farther! We love this Jamis Defcon 2!
It's safe to say that if you're rolling downhill on this beast no debris
will stand between you and your destination. If you have any questions email our knowledgeable staff, and we will help you out!
MP4 SUSPENSION
The
leverage exerted by the Defcon mp4 suspension is progressive. There are
multiple benefits to a more progressive suspension system. The rear
shock can be tuned more linearly for a smoother, more plush ride without
bottoming. Because the rear shock can be pumped to lower air pressures
without performance detriment, shock and seal life are optimized and a
greater range of adjustability is available.
UNITARY BELL CRANK LINKAGE
The
custom one-piece bell crank on the Defcon increases frame stiffness
while allowing for the elimination of a seat stay bridge. The absence of
a seat stay bridge provides more tire and suspension clearance while
creating shorter chain stays and seat stays for even greater stiffness
and better handling.
SPF FRAME TUBING
The
custom frame tubes on the Defcon are made by SPF Air Forming. SPF is
carried out at high air temperatures, where the tube structure is in its
most plastic and formable state. This allows more complicated shapes to
be produced that cannot be made using traditional forming techniques.
For example, whereas shape designs can be applied to 25% of the tube
using hydroforming, SPF allows up to 90% manipulation. The result: more
optimized shapes and less weight.
ENDURO BEARINGS
USA
made Enduro Max sealed bearings sustain 40% more load capacity than
standard radial bearings & provide more lateral support for the
multiple forces associated with mountain bike pivots. MAX bearings use
CRC Marine Grease that will not wash out or breakdown under extreme
circumstances.
10MM SHOCK HARDWARE
Our
10mm shock hardware is NOT the standard from our rear shock suppliers.
We have to pay more for it and our production lead times are usually
increased because we specify it. But the increase in lateral and
torsional stiffness for our frames and the rear shock durability and
performance is worth every extra dollar and every extra delivery day.
WHY 15MM AXLES?
15mm
thru-axle QR's offer all the benefits of the 20mm thru-axle design
(stiffness!) + the benefits of the standard 9mm QR system (quick wheel
removal!) without any of the down sides. The weight of the 15mm system
is similar to the classic 9mm system (thanks to the lightweight alloy
axle & reduction in fork leg weight) , but it is nearly as stiff as a
20mm axle. The increase in stiffness improves steering & handling
significantly. It also puts less stress on the fork's internals,
improving fork durability and performance.
UPGRADES FROM DEFCON 3
-Rock Shox Pike RC & Monarch Plus Debon Air
-Shimano SLX 1x11 drivetrain
-Stan's Flow MK3 wheelset
CHANGES / UPGRADES FROM 2016
-Shimano SLX 1x11 drivetrain
-Shimano Zee 4-piston brakes
-Stan's Flow MK3 wheelset
-Vittoria TNT tires
-Answer cockpit
Frame:
Triple-butted 6061 air-formed aluminum, 160mm travel mp4 suspension,
Enduro Max sealed bearing pivots, 1.5 - 1 1/8" tapered head tube,
asymmetrical chainstays, 12x142mm thru-axle, dropper post routing,
ISCG05 chainguide mounts, Rock Shox Monarch Plus RC3 Debon Air shock
w/3-position compression, 10mm hardware, replaceable derailleur hanger,
Rock Shox Maxle axle
Fork: Rock Shox Pike RC 27.5", lock-out,
Charger damper, external rebound, low speed compression adjust &
lock-out, 15x110mm axle, 35mm uppers, magnesium lowers, 160mm travel
Headset: FSA Orbit 1.5 Zero-Stack internal cup, 8mm cone spacer
Wheels:
Stan's NoTubes Flow MK3 Team 27.5" tubeless wheels, Neo Series 15x110mm
axle front and 12x142 mm rear hubs, Sapim Race spokes
Tires: Vittoria Goma 27.5 x 2.4" front & & 2.25” rear, TNT tubeless
Derailleurs: Shimano SLX Shadow Plus, 11-speed
Shift levers: Shimano SLX, 1x11-speed
Chain: KMC X11-1 EPT (Anti-Rust), 11-speed
Cassette: Shimano XT M8000, 11-speed, 11-46T
Crankset: Shimano SLX, 32T, 170mm (15"), 175mm (17-21")
BB Set: Enduro BSA
Brakeset: Shimano Zee 4-piston, 180mm RT66 rotors
Handlebar: Answer ProTaper Riser, 780mm x 25mm rise, 31.8 mm diameter
Stem: Answer ATAC AME, 50mm extension, 31.8mm clamp diameter
Grips: Jamis Lock-On
Seat Post: KS Supernatural, 125mm travel, Southpaw remote
Saddle: WTB Volt Comp
Sizes: 19"
Color: Charcoal
Actual Weight: 32.4lbs