The product consists of three layers of aluminum foil with plastic bubble laminated between the aluminum foil,provides excellent insulation: Reflects up to 97% of radiant energy in addition to resisting other types of heat transfer from conduction, convection and radiation. The two side aluminum foil forms an effective barrier against moisture, air currents and vapors.
Benefit:
1. Cost-effective;
2. Easy to install;
3. Resists growth of fungi, mold and mildew;
4. Keep warm in winter, hold cool in summer;
5. Safe to handle, no odor and toxicity, environmentally- friendly,energy-saving;
Roof,Ceiling,Wall,Floor,Attic,Livestock Shelters,Basement,Factory buildings,Duct wrappings,Container liner,Warehouses,Sun-stop cover and vehicles
1. Thermal insulation and light inflecting in the constrction and protection for both cold winter and water piper
2. Separation of refrigerator,warm keeping for center air-conditioned,refrigerator and other home appliances
3. Thermal insulation,sound absorption and noise reduction for car ,train, refrigerator car and laboratory, moisture proof cushion for traveling.
Installation methods and Installation Projects:
---Measure the metal roof to determine the amount of bubble foil wrap insulation required for the project. Purchase approximately 10 to 15 percent more product than required to account for overlapping and to provide the proper air gap between the purlins -- the horizontal lengths of wood that support the roof panels between the rafters.
---Cover the metal roof purlins with double-sided adhesive tape. Unroll the foil
wrap insulation and attach it to the first purlin. Continue to unroll the foil insulation and attach it the remaining purlins, paying attention to allow the insulation to sag at least 1 inch between the horizontal members. The sagging provides an air gap that raises the insulation’s efficiency.
---Continue to attach the Aluminum foil bubble insulation to the metal roofing purloins, overlapping the adjoining sheets 2 inches as you go. This is a temporary hold to keep the bubble foil wrap in place while you prepare the next step.
---Secure the bubble foil to the framing members with furring strips. Attach the furring strips perpendicular to the purloins every 24 inches to the framing members with 2-inch metal screws, paying attention to not disrupt the insulation’s sagging. Use a drill equipped with a screwdriver bit to drive the screws into the framing members.
---Cover the seams of the bubble insulation with foil tape.
Package includes:
Rolls of aluminum foilinsulation depend on your optional(not include tape)
You can use the tape in all joining and sealing applications such as wall and roof installation, sheet metal work and ducting.
High tensile strength aluminum backing provides excellent reflection of both heat and light
Super strong adhesion and holding power offers reliability
The tape is long lasting and pressure sensitive.
Easy to tear by hand
Feature：
-100% Brand New
-Venture Reinforced & Extra Strength
-Strong adhesion, anti-aging, good insulation properties.
Specifics :
Material: Foil
Color: Silver
Length: 25M
Width: 80MM
Package Includes:
4 Rolls 25M Aluminum Foil Tapes only (Not include Aluminum Insulation Foil)
PayPal, MasterCard, Visa, American Express and Google Pay. Afterpay will be listed as an option if it is available.
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We send goods to your Address in eBay. If you want to revise the shipping address. Please contact us within 24 hours by e-mail. Thanks in advance for your close cooperation!
Shipment is withinAustralia.
Items are generally dispatched within 1 working day after payment is cleared.
Buyers will also be able to trace deliveries online with a unique tracking number. While we endeavor to send all our items with tracking numbers, there may be a few smaller items that are not sent with a tracking number.
Buyers have full responsibility to provide us with the correct delivery address on the checkout page before payment is made.
Re-delivery fee may be charged to buyers for items that are undelivered and/or returned to us due to incorrect delivery address or unsuccessful deliveries.
Items will only be delivered during normal working hours (9am to 5pm on weekdays. Delivery is not available on weekends, public holidays or after business hours.
If it is the buyer's personal reason to return the item, the return postage fee would be at buyer's charge. Plus, the buyer also need to pay 10% restocking fee.
Returns must be agreed by both parties prior to the actual return with 30 business days.
Buyers must also strictly follow our returns procedure when returning an item.
We reserves the rights to provide buyers a replacement, parts or a full or partial refund. Charges may apply if the product is damaged by buyers when the returned item is received.
Should you change your mind and wish to return your item, this can be done if you notify us within 30 days of receiving your item. Please note, to qualify for such a return:
Please wait for our confirmation on how the item is to be returned.
The item must retain all original internal and external packaging.
The item itself must not be opened. We acknowledge the external box may have been opened for a visual inspection, but nothing else must be opened or used.
Just prior to returning it to us, ensure that there is nothing (e.g. return paperwork, email copy) stuck on the item or anywhere else inside of the box.
Any postage labels or return paperwork must be stuck on the outside box.
Once the item has been returned, we will need to deduct the initial dispatch and also the return freight charges from your refund.
Refunds will only be processed Paypal, depending on the original method of payment.
We make sure everything we do honors that connection – from our commitment to the highest quality items we can achieve, to the way we engage with our customers and communities to do business responsibly.
You Are guaranteed to have your items delivered or your money back
The product consists of three layers of aluminum foil with plastic bubble laminated between the aluminum foil,provides excellent insulation: Reflects up to 97% of radiant energy in addition to resisting other types of heat transfer from conduction, convection and radiation. The two side aluminum foil forms an effective barrier against moisture, air currents and vapors.
Benefit:
1. Cost-effective;
2. Easy to install;
3. Resists growth of fungi, mold and mildew;
4. Keep warm in winter, hold cool in summer;
5. Safe to handle, no odor and toxicity, environmentally- friendly,energy-saving;
Roof,Ceiling,Wall,Floor,Attic,Livestock Shelters,Basement,Factory buildings,Duct wrappings,Container liner,Warehouses,Sun-stop cover and vehicles
1. Thermal insulation and light inflecting in the constrction and protection for both cold winter and water piper
2. Separation of refrigerator,warm keeping for center air-conditioned,refrigerator and other home appliances
3. Thermal insulation,sound absorption and noise reduction for car ,train, refrigerator car and laboratory, moisture proof cushion for traveling.
Installation methods and Installation Projects:
---Measure the metal roof to determine the amount of bubble foil wrap insulation required for the project. Purchase approximately 10 to 15 percent more product than required to account for overlapping and to provide the proper air gap between the purlins -- the horizontal lengths of wood that support the roof panels between the rafters.
---Cover the metal roof purlins with double-sided adhesive tape. Unroll the foil
wrap insulation and attach it to the first purlin. Continue to unroll the foil insulation and attach it the remaining purlins, paying attention to allow the insulation to sag at least 1 inch between the horizontal members. The sagging provides an air gap that raises the insulation’s efficiency.
---Continue to attach the Aluminum foil bubble insulation to the metal roofing purloins, overlapping the adjoining sheets 2 inches as you go. This is a temporary hold to keep the bubble foil wrap in place while you prepare the next step.
---Secure the bubble foil to the framing members with furring strips. Attach the furring strips perpendicular to the purloins every 24 inches to the framing members with 2-inch metal screws, paying attention to not disrupt the insulation’s sagging. Use a drill equipped with a screwdriver bit to drive the screws into the framing members.
---Cover the seams of the bubble insulation with foil tape.
Package includes:
Rolls of aluminum foilinsulation depend on your optional(not include tape)
You can use the tape in all joining and sealing applications such as wall and roof installation, sheet metal work and ducting.
High tensile strength aluminum backing provides excellent reflection of both heat and light
Super strong adhesion and holding power offers reliability
The tape is long lasting and pressure sensitive.
Easy to tear by hand
Feature：
-100% Brand New
-Venture Reinforced & Extra Strength
-Strong adhesion, anti-aging, good insulation properties.
Specifics :
Material: Foil
Color: Silver
Length: 25M
Width: 80MM
Package Includes:
4 Rolls 25M Aluminum Foil Tapes only (Not include Aluminum Insulation Foil)
PAYMENT
PayPal, MasterCard, Visa, American Express and Google Pay. Afterpay will be listed as an option if it is available.
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We send goods to your Address in eBay. If you want to revise the shipping address. Please contact us within 24 hours by e-mail. Thanks in advance for your close cooperation!
SHIPPING
Shipment is withinAustralia.
Items are generally dispatched within 1 working day after payment is cleared.
Buyers will also be able to trace deliveries online with a unique tracking number. While we endeavor to send all our items with tracking numbers, there may be a few smaller items that are not sent with a tracking number.
Buyers have full responsibility to provide us with the correct delivery address on the checkout page before payment is made.
Re-delivery fee may be charged to buyers for items that are undelivered and/or returned to us due to incorrect delivery address or unsuccessful deliveries.
Items will only be delivered during normal working hours (9am to 5pm on weekdays. Delivery is not available on weekends, public holidays or after business hours.
Terms of Sale
If it is the buyer's personal reason to return the item, the return postage fee would be at buyer's charge. Plus, the buyer also need to pay 10% restocking fee.
Returns must be agreed by both parties prior to the actual return with 30 business days.
Buyers must also strictly follow our returns procedure when returning an item.
We reserves the rights to provide buyers a replacement, parts or a full or partial refund. Charges may apply if the product is damaged by buyers when the returned item is received.
Should you change your mind and wish to return your item, this can be done if you notify us within 30 days of receiving your item. Please note, to qualify for such a return:
Please wait for our confirmation on how the item is to be returned.
The item must retain all original internal and external packaging.
The item itself must not be opened. We acknowledge the external box may have been opened for a visual inspection, but nothing else must be opened or used.
Just prior to returning it to us, ensure that there is nothing (e.g. return paperwork, email copy) stuck on the item or anywhere else inside of the box.
Any postage labels or return paperwork must be stuck on the outside box.
Once the item has been returned, we will need to deduct the initial dispatch and also the return freight charges from your refund.
Refunds will only be processed Paypal, depending on the original method of payment.
ABOUT US
We make sure everything we do honors that connection – from our commitment to the highest quality items we can achieve, to the way we engage with our customers and communities to do business responsibly.
You Are guaranteed to have your items delivered or your money back
