PLEASE ENSURE THIS WILL FIT YOUR LAMP BEFORE  YOU PLACE AN ORDER.READ BELOW CAREFULLY-THANK-YOU. MIS-ORDERED ITEMS ARE NOT RETURNABLE. 

IMPORTANT SAFETY INFORMATION! PLEASE READ BEFORE PURCHASE

THESE READY-WIRED KITS ARE CAREFULLY AND INDIVIDUALLY MADE TO ORDER FOR YOU, EVERY POSSIBLE SAFETY PRECAUTION HAS BEEN CONSIDERED IN THE CONSTRUCTION- HOWEVER, IT IS POSSIBLE TO DAMAGE THIS KIT BY OVER-TWISTING THE FLEX OR PUTTING UNDUE DOWNWARD STRESS ON THE FLEX AND PULLING A CONNECTION OUT OF THE INTERNAL CONNECTOR BLOCK SWITCH.

ALL FINISHED KITS ARE PHOTOGRAPHED BEING SAFETY TESTED ON THE WORKBENCH THEREFORE I WILL ACCEPT NO RESPONSIBILITY WHATSOEVER FOR ANY INABILITY TO CORRECTLY INSTALL THE KIT ONTO A FINISHED LAMP, THEY ARE OFFERED AS EASY-FIT SPARE PARTS ONLY. 

PLEASE!! IF YOU ARE IN ANY DOUBT AT ALL-CONSULT A TRADES PERSON OR ELECTRICIAN       

 A complete ready to fit rewire kit for basic standard ceramic or metal table lamp bases.(where you have a hole at the top ready to thread) Comprises of a Solid brass switched lamp holder BC (bayonet), a steel threaded rod, this has a grommet fitted, 2 soft fibre washers, a steel retainer washer, a toothed washer and a steel hexagon lock nut. (You may not need to use all the washers) Pre-wired to the holder is 2.5 metres (over 8 feet) 3 core 0.5mm core British-made gold flex,(overall cable diameter is 5.5mm)  and a 3A fused BS1363 UK black plug top is the only thing you need to fit. All cable ends are supplied crimped with ferrule ends so will not fray.
If you are looking to convert a non-standard type of lamp base, this may not fit, and you should seek advice if unsure before purchasing. Standard floor lamps generally need longer flex and often a wood mounting plate.

A 10mm fixing kit is supplied fitted which uses a 40mm long thread, giving a total useful thread of around 30mm. It will fit either a 10mm hole or 1/2" hole. May also be used on some bottle conversions et cetera (extra parts/bung/glass grommet will be required).
Super simple! (Read below please*). All kits are made up usually same day as orders placed.

*SAFETY:PLEASE READ CAREFULLY. All kits are assembled to a high standard and are photographed working and P.A.T tested before shipping ensuring they leave me working and in an electrically safe condition, however, this CANNOT apply to finished lamps, especially if they are fitted to a third party's property. You will need to have the finished lamp re-assessed by a qualified electrical outlet if you need a certificate label.
The switch is now tested 10 times to ensure reliability.

THESE ITEMS ARE STRICTLY SOLD AS SPARE PARTS, AND NO RESPONSIBILITY ON MY PART WILL BE ASSUMED FOR ANY INABILITY TO CORRECTLY FIT THEM. They are sold as spares and NON-REFUNDABLE. Any damage incurred to this spare or the lamp it is fitted to is entirely down to user. Please-if in any doubt - consult a qualified trades person. 

UK Tracked 48  small parcel. (up to Max.8 units/2Kg)