ClaraMedTM Smartphone endoscope adapter with smart Portable LED Light Source compatible with Olympus endoscopes. S3
Welcome and thank you for choosing our new ClaraMedTM products.
Our products are specially designed for providing integrated portable endoscopy solutions with special attention to the small size, light weight and low price, so that its affordable and readily available in any place any time.
Features:
The idea of the smartphone endoscope adapter is to allow using the endoscope in any place at any time.
This is achieved by the smartphone camera which is very close in quality to the professional endoscope cameras.
The advantage of this portable system is that its small in size, as the whole system could be carried in your handbag.
It is also very helpful in the teaching/learning process, recording, archiving and sharing the recorded endoscope images.
The low price of our system makes it available to all practicing doctors who use endoscopes in their daily practice.
The new smartphone endoscope adapter has the advantage of connecting to different smartphone models unlike the previous adapter which was compatible with only one smartphone model.
This allows upgrading your smartphone without being worried about changing the adapter.
New Model features:
Improved design of the adapter for more stability of the endoscope and smartphone.
Now the arms supporting the endoscope are longer with rubber pads. This allows more security and stability in holding the endoscope.
Curved arms supporting the smartphone. Now its almost impossible to slip from the smartphone.
Improved quality of the material of the adapter.
The ClaraMedTM portable LED light source features
double the light intensity than most portable light sources in the market.
Now it can be used safely in long surgeries without being
worried about battery drainage, thanks to the available external USB power
supply.
Micro USB power and charging slot makes it easy to charge
any time any where with any USB charging slot.
The micro USB slot is not only used for charging, but also
for powering the light source, so you do not have to worry about battery
drainage in long surgeries.
Unlike the mechanical button switch that ruins with time in
most portable light sources in the market, the ClaraMedTM smart portable
LED light source features a Smart switch button and controller with LED
indicator which allows for light intensity control and also gives data about
battery charge level and charging status.
Standard USB slot for using this light source as a power
bank for emergency smartphone charging.
The included battery is a genuine LG battery with a trusted capacity
that lasts more than 3 hours “according to light intensity used” and long life
span with more than 500 cycles of usage.
Dimming circuit for optimal operating light intensity control.
Smart circuit that stops charging when charging complete and stops the device when battery is almost empty, so attaining maximum battery protection with longer life span.
* An accessory adapter for connecting Olympus endoscopes (that have the standard Olympus cable connection) and also light cables with Olympus connection.
* The light source can also be connected to endoscopes that have Storz thread (please review the pictures)
How to use:
Using the smartphone adapter:
Connect the smartphone adapter with the smartphone and the endoscope (will need to align the endoscope with the phone's "main" camera in most phones).
We recommend "open camera" app for android phones and "e-i pro" app for iphone models. These apps allow manual focus control and manual exposure control (which are necessary for clear endoscopic picture)
A small circle of the endoscope image will appear on the screen and you will have to zoom in to fill the smartphone screen with the endoscope image.
Using the light source:
1- First time charging:
-Upon
first use, the battery should be fully charged as it is shipped with only 40% factory
charge.
-To expose the USB charging slot,
rotate the head of the light source counter clockwise.
-The LED indicator of the button
switch turns red when charging is in progress and turns blue when charging is
complete.
-Now you can disconnect the charger
and start using the device.
2- Using the device:
- Connect the endoscope* or light
cable** to the light source
-Press the power button.
. The light will turn on with moderate intensity (this is the
recommended intensity for most of examination and long surgeries).
-Press the power button again within 2
seconds>
.The light will turn to maximum intensity ( this mode is ideal for short
procedures that requires intense light - not to be used for more than 10 minutes).
-Pressing the power button after 2
seconds from turning on will turn off the device.
-When the device is on in any of the
above modes, long press the power button with start the dimming feature. Leave
the button to keep the desired light intensity.
-Rapid 2 press will turn strobe
feature on (beta***).
-The LED indicator in the power button
turns blue when battery is charged, red when it gets weak and flashes red when
the battery is empty before the device turns off.
*For endoscopes with Storz adapter,
please remove the adapter first, then connect the light source to the inner
thread of the endoscope.
*For Olympus endoscopes, a special
adapter should be connected (sold in S3 and S4 models)
**For connecting Storz or Olympus
light cables, a special adapter should be connected (sold in S2 and S4 models
for storz cable, and in S3 and S4 models for Olympus cable)
***under development feature.
Important notes:
1- The maximum light intensity mode is only suitable for short procedures, and it should not be turned on for more that 10 minutes to avoid over heating of the device.
For longer procedures, please turn into the medium light intensity mode
2- It should be avoided to hold the phone-endoscope system from only the light source, or from the phone – but you hold together supporting the endoscope and phone in the same time – this to avoid accidental slipping of the endoscope from the adapter and damage to the endoscope or smartphone, as in the pictures.
3- The quality of the produced image depends mainly on two factors: The diameter of the endoscope and the smartphone camera quality.
4- It is possible to check the quality of the produced image before making the purchase, by placing the endoscope eyepiece in front of the center of your smartphone camera and check the quality using the apps mentioned above.
5- Please do not use the built in android camera app "in old android phones" because it doesn't provide white balance, exposure or focus control which might be deceiving that your smartphone is not compatible, but "open camera" app gives best results.
6- This light source supports most of rigid and flexible endoscopes that don't have a built in light cable,, if you're not sure that your endoscope will work or not please contact me before you make the purchase
7- The included battery is shipped with about 40% charge. Please, fully charge the battery before using it.
Technical Data:
Brand: CLARAMEDTM
Model: S3
Color: Black
Material: Aluminium alloy
USB Output power: 5V 1A
Emitter BIN: T6 up to 10 W
Number of Emitters: 1
Color BIN: neutral White (daylight)
Color temp.: Approx. 5700 K
Working Voltage: 3--4.2 V
Life cycle of bulb: Approx.10000 h
Power Supply: 1 x 18650 Lithium Ion battery
or direct USB
Battery brand: genuine LG MJ1
Actual Lumens: up to 1000 lumens
Run time: 3-5 Hours (depending on light intensity used)
Number of Modes: one press to boot at moderate intensity – press again within 2 seconds gives maximum light - long press 2 seconds: 10%-100%. Quickly press the two times to enter strobe mode(beta)
Switch Type: Smart touch switch with LED indicator
Dimensions: 13.5 cm x 2.6 cm
Weight: 134 g with battery inside
Package contents:
1-Smartphone endoscope adapter
2-ClaraMedTM portable LED light source (endoscope not included)
3-Accessory adapter for connecting Olympus endoscope and Olympus light cables.
4-LG Lithium ion battery
5-USB cable
Shipping:
International Buyers - Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Brazil customers: please email us with your "CPF number" when placing your order as its required by the shipping company