For sale is a Panasonic AK-HC931P Multi-Format Camera (Body Only) 2/3" CCD Million-Pixel with 720p HD SDI or LEMO EDW.3K SMPTE fiber connector outputs.  Powered by 12 VDC external 4 pin A4F or CCU AC input via the fiber SMPTE rated LEMO cable.  This camera was fitted with a studio HD B4 2/3" Fujinon lens (not included) and tested at a local ETV studio and the image is crisp and sharp.  All color temps and filters were tested and op chk good.  Camera is in excellent condition and shows very little signs of use.  There were stickers on the cheek side and some slight crazing from removal but that is the only cosmetic issue.

Pictured is the actual camera body you will receive.  Also pictured is a HD output of color bars at 720p via a 720p/1080i using a HD DLP projector.  You provide the lens and/or viewfinder of your choice and you're well on your way to studio production!  Since there is no viewfinder for this camera I do not have the ability to access the menu function and check the settings.  All functions were tested to best of my abilities.  Tripod and QR not included.

Domestic sales and shipping only.

Thank you for looking and please feel free to ask any questions.

 

Features

Newly developed 720P, 2/3z million-pixel CCDs

incorporated

≥ This achieves a high sensitivity that surpasses the

standard sensitivity of F10 and is on a par with SD.

≥ Smear has been cut to 130 dB and the number of white

marks has been drastically reduced by process

improvements.

≥ H-CCD drive is accomplished at a frequency of 74 MHz

to attain a high response and high resolution.

Digital signal processing LSI with high picture quality

featured in the camera unit

≥ After the process circuits, the signals undergo 12-bit, 74

MHz high-picture-quality digital processing, yielding a

high reliability, more functions and enhanced operating

ease as a result.

Multi-functional enhancer

≥ In addition to the many functions such as chroma DTL,

skin DTL and dynamic DTL, there is a choice of 8 boost

frequencies. (For both HD and SD)

Designed to achieve low noise levels of below NC15

≥ The fan mode can be switched to suit the application at

hand, and measures to reduce the power requirements

and improve the heat dissipation were adopted in the

final design.

Fuller complement of control circuits and auto setup

(ASU) function

≥ The self-diagnosis functions have been enhanced, and it

has now become possible to select the ASU function by

combining the external shooting chart and internal test

signals as well as the normal, simplified or other mode.

Peripheral components

≥ Ease of operation can be further improved by configuring

a system where the Multi-Format Camera is used in

combination with the remote operation panel (ROP) and

master setup unit (MSU).

≥ Using the ROP matrix, for instance, ROP assignment is

enabled without connector patch switching.

Data trunk function

≥ Two RS-422 circuits are provided as a standard feature.

They obviate the need for the cables used with virtual

control, pan-tilt head and lens control, etc.

D/C output of camera supported (optional function)

≥ The VF output or camera output can be selected as the

D/C output.

≥ The VF images can be monitored on the NTSC LCD

monitor.