• HOME
  • ABOUT US
    ABOUT US

    About Outback Equipment

    Started by a few mates with a shared passion for 4WDs and all things outdoors – Outback Equipment was built on the ideal of bringing old world service back to online shopping.

    No flashy sales tactics, no gimmicky products – just good old-fashioned customer service and honest advice.

    We only carry a range of products that we would personally use ourselves, products tried and tested for Australian conditions.

    We cater to the broadest range of individuals, from the rookie 4WD and camper just getting started, to the saltiest of you outback veterans.

    We help where we can and we are always open to suggestions from you who have been around the block a few times so we may better serve you.

    We are 100% Australian owned and operated with our warehouse being located in Brisbane

    X CLOSE
  • CONTACT US

Please note all Xrox bars are made to order. Current lead time estimate is 7-8 weeks from order payment confirmation to dispatch.

Xrox bullbar To Suit Xrox bullbar To Suit Toyota Landcruiser 75/78/79 Series Cab Chassis, ute & PC NOT VDJ To 03/2007 High Mount Winch

Born from the demands of serious off-road competition, Xrox® bars deliver the results you want – serious good looks, extreme off-roading capabilities, airbag  and ADR compliant and the durability that real steel and Australian design delivers.

Xrox® gives you the protection you need with the clearance you crave. Lighter than traditional bullbars, our smart “winged” design allows for fast easy replacement while maintaining strength.

Steel cross over tube bullbars are the ultimate in offroad and hard terrain driving. The steep incline of the side wings allow for greater approach angles by giving the wheels more upward clearance and free them to turn for difficult ascents.

XROX Bullbars are also bead blasted and coated in a heavy-duty powder coat for a tough and professional finish. The unique three-piece design also allows for simple shipping and easier repair or parts replacement.

XROX bars are also coated in a durable zinc undercoat to help prevent the possible development of corrosion and surface rust.

Each bar contains 9 multi-function tags for the fitment of aerials, spotlights and sand flags, giving the option for a truly modular fit out. Built in hi-lift jack points together with mounting positions for winches, tow hooks, recovery eyes, lights, aerials and sand flags gives you the versatility you need.

  • 2 x Hi Lift Jacking Points.
  • 4 or 6 Recovery Hook/Eye Locations.
  • 9 x Aerial / Sandflag / Spotlight Tabs.
  • Constructed from 2" Steel Tube.
  • Finished in Black Powdercoat.
  • Detachable Side Wings (can be easily replaced if damaged).
  • Supports up to 9,000lb Low Mount Winch (mounts directly to bar)
  • Airbag Compatible.
  • Improves Ground Clearance & Approach Angles.
  • Designed & Manufactured in Australia.

IMPORTANT: As these products are made custom to order, they are NON RETURNABLE & NON REFUNDABLE. Please double check and ensure your vehicle specifications are correct when ordering.

Please note all Xrox bars are made to order. Current lead time estimate is 7-8 weeks from order payment confirmation to dispatch.

Xrox bullbar To Suit Xrox bullbar To Suit Toyota Landcruiser 75/78/79 Series Cab Chassis, ute & PC NOT VDJ To 03/2007 High Mount Winch

Born from the demands of serious off-road competition, Xrox® bars deliver the results you want – serious good looks, extreme off-roading capabilities, airbag  and ADR compliant and the durability that real steel and Australian design delivers.

Xrox® gives you the protection you need with the clearance you crave. Lighter than traditional bullbars, our smart “winged” design allows for fast easy replacement while maintaining strength.

Steel cross over tube bullbars are the ultimate in offroad and hard terrain driving. The steep incline of the side wings allow for greater approach angles by giving the wheels more upward clearance and free them to turn for difficult ascents.

XROX Bullbars are also bead blasted and coated in a heavy-duty powder coat for a tough and professional finish. The unique three-piece design also allows for simple shipping and easier repair or parts replacement.

XROX bars are also coated in a durable zinc undercoat to help prevent the possible development of corrosion and surface rust.

Each bar contains 9 multi-function tags for the fitment of aerials, spotlights and sand flags, giving the option for a truly modular fit out. Built in hi-lift jack points together with mounting positions for winches, tow hooks, recovery eyes, lights, aerials and sand flags gives you the versatility you need.

  • 2 x Hi Lift Jacking Points.
  • 4 or 6 Recovery Hook/Eye Locations.
  • 9 x Aerial / Sandflag / Spotlight Tabs.
  • Constructed from 2" Steel Tube.
  • Finished in Black Powdercoat.
  • Detachable Side Wings (can be easily replaced if damaged).
  • Supports up to 9,000lb Low Mount Winch (mounts directly to bar)
  • Airbag Compatible.
  • Improves Ground Clearance & Approach Angles.
  • Designed & Manufactured in Australia.

IMPORTANT: As these products are made custom to order, they are NON RETURNABLE & NON REFUNDABLE. Please double check and ensure your vehicle specifications are correct when ordering.

About Outback Equipment

Started by a few mates with a shared passion for 4WDs and all things outdoors – Outback Equipment was built on the ideal of bringing old world service back to online shopping.

No flashy sales tactics, no gimmicky products – just good old-fashioned customer service and honest advice.

We only carry a range of products that we would personally use ourselves, products tried and tested for Australian conditions.

We cater to the broadest range of individuals, from the rookie 4WD and camper just getting started, to the saltiest of you outback veterans.

We help where we can and we are always open to suggestions from you who have been around the block a few times so we may better serve you.

We are 100% Australian owned and operated with our warehouse being located in Brisbane.

Due to recent eBay policy changes we can no longer take calls directly to us. You can however still contact us directory via eBay messages.

Due to recent eBay policy changes we can no longer take calls directly to us. You can however still contact us directory via eBay messages.

Outback Equipment is committed to customer satisfaction. If you are unhappy with any product you receive, simply contact us so we can work with you to resolve the issue as quickly as possible.

Broken or faulty products

If a product is found to be defective, please contact our customer service team as soon as you are made aware of the problem. A repair, replacement, or refund will be organised and will generally occur after consulting with the manufacturer or supplier.

Any repairs that may need to be carried out will be done so by the manufacturer and not by Outback Equipment. If a repair cannot be made, then Outback Equipment will endeavour to have the item replaced or a refund will be offered.

Note: Goods are only warranted for defects in manufacturing. The standard warranty across most products is 12 months unless otherwise specified by the manufacturer.

Change-of-mind or incorrect choice

For any purchases where a change-of-mind occurs or the customer has chosen an incorrect item, the customer has up to 30 days to request an exchange or a store credit. All exchanges, store credits, and refunds will be effected upon return of the item. Any arrangement made prior to the item being returned, will be made at the discretion of Outback Equipment. These items must be returned in their original, undamaged condition.

Note: Online store credits are only applicable for purchases made through our webstore.

Return shipping

If a product is deemed faulty and is required to be returned, Outback Equipment will provide a Postage Paid label. This only applies to claims made within 60 days from purchase. Any claims made outside this period will be considered a warranty claim and postage will therefore need to be incurred by the customer.

For any change-of-mind or incorrectly chosen purchases that need to be returned, the cost of return postage will be incurred by the customer.

Our return address is:

Outback Equipment
1 Murdoch Cct
Acacia Ridge
Qld, 4110

Please contact Outback Equipment before returning any items.

Fitment or Assembly of Goods

For goods that require fitment or assembly our return policy cannot extend beyond the value/cost of the item ordered. This is in large part because the performance of these items is dependent on correct fitment, assembly, and operation. The part must only be fitted by a qualified person. Failure to comply with manufacturer’s specifications may result in property damage, severe injury, or death.

Goods should also be carefully inspected for marks, scratches, or any damage prior to installation. No warranty claims of this nature will be accepted once fitted.

At Outback Equipment, we value ease and convenience when it comes to online shopping. This is why we have provided the following answers to the questions most frequently asked by our customers.

If you cannot find the answer you are looking for, please feel free to contact us via eBay and we will get back to you as quickly as possible between the hours of 8.00am and 4.30pm Monday to Friday.

My order arrived damaged – what should I do?

If one or more of your items has been broken in transit, please contact us by messaging our eBay store to arrange a return.

I have received the wrong product – what should I do?

Please send us a message as soon as possible detailing the eorror and our friendly customer service team will work hard to resolve the issue.

My order never arrived – what should I do?

If your order never arrives or has gotten lost in transit, please contact us through eBay as soon as possible.

I wish to return an item – how do I do this?

Please refer to our returns policy for details on how to return an item.

© 2019 Outback Equipment (AUST) Pty Ltd