Hotspot Flue Free Chimney Cleaner Powder 750g Removes Tar and Creosote Deposits
The action of Hotspot Flue Free Chimney Cleaner stops and removes tar/creosote build-up, reduces risk of chimney fires, arrests chimney corrosion and maintains clean heating surfaces. Flue Free is a combustion deposit conditioner. It works by rising into the chimney on the flue gases. On contact it reacts with the acids in the tar/creosote deposits and 'fluidises' them. Absorbents then soak up these fluids, producing a drying action, which weakens the bonding to the chimney. These deposits eventually fall back down the chimney or are removed by sweeping.
Flue Free should be used on a regular basis to reduce the frequency of chimney sweeping. Flue Free can be used in all wood stoves, open fireplaces and solid fuel equipment. Suitable for use with all flues including stainless steel.
Size: 750g
Usage Instructions: 1. Remove excess ashes or cinders. 2. Sprinkle 2 scoops of Hotspot Flue Free Chimney Cleaner onto a low fire twice per week, (effectiveness drops when applied to high fires) and allow up to 1 hour to burn powder fully. 3. If no evidence of improvement is noticed, increase dosage frequency. 4. Use double dosage for fires over 75000 BTU, in wood/solid fuel cookers/boilers or if chimney area is abnormally large.
PLEASE NOTE: Loosened creosote can cause chimney blockage if initial deposits are heavy or if initial dosage/dosage frequency is excessive.