FOR TDL-2025

Functional Description:

human body infrared sensor module, wide voltage, input voltage equals to output voltage

Working voltage: 5V -24VDC (wide voltage)

Operating temperature: - 20 ° C ~ +50 ° C

Quiescent current <50uA

Output current: 5A

Trigger mode: continuous trigger

Output mode: sensor output

Delay range: Factory setting 18S (18-350 seconds adjustable)

Sensing method: passive

Sensing angle: 120 degrees cone angle

Sensing distance of 5-7 meters

Size: about 36 * 36 * 27mm/1.42 * 1.42 * 1.06in (length * width * thickness), cable length: about 30cm/11.81in

Light control: 8lm below

5.5DC port

FOR PIR-8

Features:
Infrared detection controller, adopt infrared detection way to control load switch
You can install the human body sensors in the appropriate environment according to actual needs
LED Lighting motion sensing switch which provides 1 to 10 minute OFF delay timing function
The sensor switch activates ON when a body in motion enters the field of view with an ON time hold that is adjustable from 1 to 10 minutes after motion has ceased
PIR (Passive InfraRed, IR) sensor has an effective range of 16 feet and diminished sensing of a moving human body to 26 feet
The field of view of the PIR Dome Lens is 60 degrees nominal
The switch operates on 12 or 24 volts DC and can switch up to a 6 amp load

Specifications:
Item name: Body sense infrared led strip controller
Power supply voltage: 12-24V
Output voltage: 12-24V
Max load current: 6A
Induction range: 8M / 26.2FT

FOR BC-160

Timer Delay Mode: Adjustable 10 Seconds to 15 Minutes Function

Specification:

1.Sensing Mode: PIR sensing + light control Timer

2.Rated Voltage: 12V

3.Delay:10s (people are moving within the sensing range, the switch will auto delay and keep connecting; if people stay still, switch will stop responding)

4.Sensing Distance: 0.5 Meter to 5 Meter (high temperature will influence switch sensibility)

5.Sensing Angle:110°

6.Sensitivity to light : Dark and Light environment

7. Timer delay mode: Adjustable 10 Seconds to 15 Minute

Notice:

1.When installing, please disconnect the power to guarantee safety

2.Don't apply it to overpower current or voltage

3.Don't install in or expose accessible to water

4.Detection distance will change according to ambient temperature's difference. In summer, detection distance is short (it is obvious when close to human body's temperature); in winter, detection distance will be far

5.Don't install in lower than -20 Celsius or higher than 60 Celsius

6.Don't expose it to sun

7.The first time power on, there will one minute initiation; during this period, the device will shine, it is normal phenomenon