Descriptions:
Brand New & High Quality.
Great for Racing Car, Helicopter and Airplane.
Stall Torque: 3.2 kg / cm (4.8V), 4.1 kg / cm (6.0V).
Operating Speed: 23 sec/60° (4.8V), 19 sec / 60° (6.0V)
Operating voltage: 4.8-7.2V.
Temperature range: -30°C -- +60°C.
Dimension: 4cm x 2cm x 3.8cm.
Package included:
1 x S3003 Servo (with accessories)
Micro Servo 3.7g
Description:100% brand new and high qualityOperating Voltage: 4.8 - 6.0VOperating Current: 100MAStall Torque:0.6 kg / 8.32oz @ 4.8V0.8 kg / 12.4oz @ 6.0VWeight: 3.7gDimensions: 22 x 11 x 27 mmTemperature Range: -30 ~ 60 deg CelsiusCable Length: 16.5cmServo Type: Analog ServoQuantity: 1 SetPackage Included:1*Micro 3.7g Mini Servo for Aeromodelling Aircraft Flight Direction RC450
Micro Servo 4.3g
Features:Brand NewCoreless MotorAll Nylon GearConnector Wire Length 150MMSpecification:Model : 4.3g Micro ServoOperating Speed (4.8V no load): 0.1sec/60 degreesOperating Voltage: 4.8-7.2 VoltsTemperature Range: -30 to +60 Degree CNet weight: approx.6gColor: Blue packing content:1 x Micro Servo 4.3G Set ESO8MADescription:Ideal servo for 250, 450 class helicopter and foam airplanes.Long servo arm for 3D flight.Specifications:Operating voltage: 4.8-6VSTD direction: Counter clockwise / pulse traveling 1500 to 1900useeStall torque (4.8V): 1.6kgf.cm (21.0 oz.in)Operating speed (4.8V): 0.12sec/60°at no loadStall torque (6V): 2.0kgf.cm (28.0 oz.in)Operating speed (6V): 0.10sec/60°at no loadPlug available: JRGear material: MetalWire length: 25cm / 9.8inES08MA II size: 23 * 11.5 * 24mm / 0.9 * 0.5 * 0.9inES08MA II weight: 13g / 0.5ozTotal weight: 86g / 3.0ozPackage List:1 * ES08MAII Mini Servos1 * Packs of Accessories DS04-NFCDescription:The signal terminal needs to be input with one 50 HZ square wave, then the duration of high level pulse, which is used to control signal cycle, can control speed and forward/backward rotation as well as stalling. The duration of high level corresponds to a speed. When high level is 1ms~1.5ms, servo rotates forward(the rotate speed is the fastest when it is 1ms, the higher the lower, servo will stop rotating when reaching 1.5ms). When high level is 1.5 ~2ms, the servo rotates backward(The servo stops rotating when reaching 1.5ms, when the duration is closer to 2ms, the closer, the faster. The backward rotation speed, the fastest when reaching 2ms)This servo carries meso-position adjustment potentiometer(it can only be seen by peeling off the outer cover and circuit board). We can set high level pulse at 1.5ms to observe that whether servo stops rotating. If it doesn’t stop rotating, we keep adjusting the potentiometer until it does.Features:Applies to model airplane / Model car / robotTorque: 5.5kg/cm (at 4.8V)Speed: 0.22sec/60°(at 4.8V)Working voltage: 4.8v-6vTemperature: 0℃-60℃Current: < 1000mAWeight: 38gDimensions: 40.8 x 20 x 39.5 mm Package included:1 x 360 Degree Continuous Rotation Servo MotorServo TesterQuick Overview:CCPM Servo Consistency Master/Servo tester. The device also can be used as a signal generator for electric speed controller (ESC). With it, you can test your motor system without using a transmitter and receiverFeatures:There are 3 modes to check servos or ESC:Manual mode: turn the knob with different speed, check the reaction time;Neutral mode: make the servo go back to the neutral point;Automatic "window wiper" mode: make the servo swing like a window wipers in the biggest angle.It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.You can also connect 1-3 ESC to test and compare their reaction time respectively.It can connect 3 servos of the CCPM helicopters and select servos.It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.With LED indicators.Specifications:Output: 15mA (5.0) Voltage consumption: DC4.8-6VOutput signal: 1.5ms±0.5msProduct size: 44 x 30 x 23mmProduct weight: 5g Package Contents:1*Servo Tester