73 79 Ford F100 F150 F250 F350 Truck Supplemental LED Dashboard Bulbs GREEN

This is for a set of LEDs that will greatly increase the visibility of your interior overall!

These will fit all the 73 - 79 Ford F Series trucks as well as the big Bronco in 1978 and 1979.

 When installed in your truck they will provide a bright, rich vibrant color.

Please note LEDs are directional. If they do not work the first time, flip them 180 degrees in the socket. 

Also note: These do not dim fully like a regular bulb.
The best way to describe is as follows... 

A 'regular incandescent' bulb can go from 1 - 10, with 1 being off/dim, and 10 being full brightness.
The LED can go 1... then 8 - 10. They have a VERY small range of brightness. 

(Most people run these at full brightness anyway, in my experience.).

Having said all that.....

You will receive bulbs for the following, from left to right in your dashboard. 

1. Headlight/wiper indicator
2. TWO bulbs for the steering column PRND21 indicator (Two different types of bulbs were used, one will work)
3. HVAC control panel indicator
4. Ashtray bulb (Not all trucks had the lighting option)
5. Radio dial indicator 

Glove Box bulb. (Not all trucks had the lighting option)

Brief notes. I have personally used these on my 79 F100. 

• All of these sockets have a 'blue bulb cap' or in the case of the HVAC, a non removable colored film that tints the light blue. These pics were all with the blue bulb cap installed.If you remove them the light will be greener. 
• The headlight wiper indicator is a VERY TIGHT fit but does work. You may need to tweak the metal housing, or shave the LED some. You'll see. 
• The "PRND21" indicator bulb can be difficult to replace. Google is your friend.
• The radio dial indicator bulb has a small metal 'tube' that goes around the OEM bulb. I suggest leaving this tube off. Some light WILL pass through around the station selector buttons, but in my opinion it looks very nice
• The glove box light must be assembled 'backwards' (black to red and red to black). It is installed with double sided tape. All standard rules for double sided tape apply. (clean surface, careful installation).

Want your gauge cluster just as bright, or even a different color?
Click here!

I test each LED before shipping! No duds!

Need to replace that broken plastic steering column bearing at the bottom of the column?
Want something METAL?

CLICK HERE!