You are bidding on a TDM410P 04 asterisk card with the following specifications:

• Model Number: TDM410P-04
• TYPE :Asterik card
• Driver: Zaptel and Dahdi
• Ports: 0 FXS and 4 FXO   (if need other module ,please send message to me )
• Interface: PCI 2.2
• Software: Asterisk Elastix trixbox Askozia Briker easyAsterisk Voyage-Linux PBX in a Flash
  Netfors
  
• Description:
  

  TDM410 Asterisk card supports up to four FXO and FXS ports, plug and play.
  Using TDM410P analog card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution include all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX. It supports standard dahdi / zaptel drivers.

  
  

  User can use TDM410 analog card with standard zaptel driver and Asterisk source code without modify any code.The FXO and FXS cards are interchangeable to suit various requirements.

  
  

  TDM410P works with Asterisk, Elastix, FreeSWITCH, PBX in a Flash, trixbox, Yate?and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

  
  

• Target Applications
• Channel Bank Replacement / Alternative
• Small Office Home Office (SOHO) applications
• Small and Medium Business (SMB) applications
• Gateway Termination to analog telephones/lines
  
• Services and Features
• Caller ID and Call Waiting Caller ID
• ADSI Telephones
• Loopstart Signaling Support

• Technical Specifications

• Up to 4 ports through a combination of FXS and FXO modules
• 4 RJ-11 interfaces on a single PCI bracket
• PCI-Express 1.0,
• Firmware accelerate I/O access to achieve high stability
• Power: 2.77W Minimum, 11.6W Maximum at 3.3 V or 5 V.
• Operation temperature: 0C to 50C
• Storage temperature: -40C to 125C
• Dimension: 136.3mm*101mm*16mm
• Weight: 82g
• Operating Systems
• Linux (all versions, releases and distributions from 1.0 up)
• Minimum Hardware Requirement
• 800-Mhz Pentium III
• 128MB RAM
• Available PCI 2.2 Slot
• Guarantee
• One Year Warranty!
• Trixbox 2.8/Elastix2.0 :

[trixbox1.localdomain ~]# dahdi_genconf
[trixbox1.localdomain ~]# dahdi_cfg -vvvv
DAHDI Tools Version - 2.2.0
DAHDI Version: 2.2.0
Echo Canceller(s): MG2
Configuration
======================

Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)




[trixbox1.localdomain ~]# asterisk -vr




trixbox1*CLI> dahdi show channels

Chan Extension Context Language MOH Interpret Blocked State
pseudo default en default In Service
1 from-pstn en default In Service
2 from-pstn en default In Service
3 from-pstn en default In Service
4 from-pstn en default In Service

trixbox1*CLI> dahdi show status
Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO
Wildcard AEX410 Board 1 OK 1 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1)

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Shipping