•  
     
     
  •  
     
     
  •  
     
     
  •  
     
     
  •  
     
     
  •  
     
     
  •  
     
     
  •  
     
     
  •  
     
     
  •  
     
     
  •  
     
     
  •  
     
     

 

Professional Portable 65W 35000rpm Electric Nail Drill Strong 90+102 L Handpiece

Product View

 
 
 

Detail

Specification
Item Type: Electric Manicure Drill & Accessory
Material: Stainless Steel
Rotate Speed: 0-35000RPM
Voltage: 110-220V 50~60Hz
Power:65W
Plug:EU/US/UK/AU PLUG
Model : STRONG 90+102L
Output: DC0~32V 0.5A
Fuse：2A(110V) 1A(220V)
Color: As Picture Shown
Handpiece weight:255g
Main Machine Weight:1290g
Main Machine Size: 12.5*9.5*6cm/4.9*3.7*2.4in
 
 
About plug:
This machine standard plug have ： US Plug, Europen Plug.
If you need British(UK) Plug or Australia Plug, we will send you an extra plug.

Product Include
1* Electric Nail Drill Machine
1* Handpiece
1*Foot Switch
1*Handpiece support
1*Box

Features
1.Foot Pedal:
Foot pedal to free your hands.No need to press the Power Switch.Just step on the pedal and the motor will work.
2.Bigger handle :
High precision,long life.Still steady even working in high speed.No vibration and low noise.
3.Potable polisher :
Equipped with fast head-loading mechanism ,good locking effective , high speed .low variations,and safety with low voltage machine .
 
 
4.Power box :
Stable power delivery ,overload protection ,effective converter,foot push , non-polarized speed adjustment.
 
 
5.Stable functioning:
The polishers produced are stable functioning, high speed ,fast polishing , quipped with head lock .
 
 
6.multifunction:
Combination of fast converting polisher and multi-function power box .Carving, Engraving, Routing, Grinding, Sharpening, Sanding, Polishing for Acrylic Nails,Gel Nails,Artificial Nails,Natural Nails,Pets' Nails,not suggest using for something hard.
 
 
7.Application:
Available for using at nail salon,beauty parlor ,spa or personal manicure pedicure,nail art,etc
 
 
8.Practical:
TWIST-LOCK Forward/Reverse direction switch suitable for RIGHT HANDED or LEFT HANDED use, Foot pedal included.
 
 
 
How to Remove and Install the Collet
1.With knurled Chuck Handle in"R"release position and bur or accessory in collet, place triangular hole in Chuck Wrench over triangular flats of Collet head&unscrew the collet counter-clockwise Remove collet.
 
2. With bur or accessory in new collet, thread into handpiece. Place triangular hole in Chuck Wrench over triangular flats of Collet head and tighten the collet clockwise. Be careful not to over-tighten. Test to insure that new collet releases accessory smoothly in the "R" released position. Test to insure that new collet holds firmly in the "S" secure position and spindle rotates freely.
 
 
 
Changing Accessories
Burs and other accessories can be inserted or removed from the handpiece collet when the collet is open. To open the collet:
1. Turn off the motor using the Motor On/Off Switch 3 and the Power Switch.
 
2. Twist the Chuck Handle in the "R" or release direction (clockwise) until the raised indicator bar clicks into the far left mark on the silver center ring.
 
3. Remove the accessory and replace with another accessory. Insert the 'new' accessory shank fully into the collet for maximum support. You should feel it touch the back of the collet.
 
4.Twist the knurled Chuck Handle toward the "S" or secure position by turning counter-clockwise until it snaps to lock the collet. The accessory and the collet will be able to spin freely. The raised collet indicator bar will be above the far right mark in the silver center ring. Note: The intermediate position between "S" and "R" holds both the spindle and the accessory in a locked position. This is useful to unscrew an over-tightened mandrel screw.
 
 
 
 
Safety Instructions
A Micromotor Handpiece is a high speed rotary power tool which can be dangerous and cause serious injury if it is not used properly. NEVER operate it without wearing eye protection.
• ALWAYS wear proper eye and face protection.
• ONLY use accessories rated for 35,000 rpm or higher speeds when operating this micromotor.safe operation when using accessories with head diameters of more than 3/32″ (2mm).
• ALWAYS observe the manufacturer's maximum speed rating when using any accessory.
• NEVER use or continue to use any accessory which appears to be damaged, loose, vibrating, bent, or out of balance. Inspect each accessory for cracks or flaws before use.
• ALWAYS insert the shank or arbor of an accessory or mandrel into the collet or chuck of the handpiece as far as possible in order to provide proper support and close the collet or chuck securely.
• NEVER use excessive side pressures which may tend to bend or break the shank or arbor of an accessory. Let the speed of the accessory do the work.
• DO NOT stall the motor by jamming or using excessive pressure on the mounted point, buff, wheel or accessory. This can result in damage to the motor.
• WEAR a dust protector, mask or respirator to prevent the inhalation of harmful dust or debris from grinding, carving or other operations performed with this power tool.
• NEVER operate with a damaged power cord. If the power cord or plug to the handpiece is damaged, repair or replace immediately.
• USE a dust collector (vacuum system) to pull sawdust, grinding dust, or other debris away from the work area and the micromotor intake vents.
• NEVER turn on or start the Handpiece while chuck is in open (unlocked) position. This can damage the handpiece. Make sure that a bur is installed and secured in the collet, that the spindle is NOT locked and that the bur can spin freely. Always operate and store it with a bur or other accessory in the chuck and with the chuck in the closed position.
• DO NOT operate the handpiece in the presence of any flammable liquid or gas.
 
 
 
Tips:
Turn off the power when using the foot pedal.
 
 
 

Copyright © 2017 DataCaciques

Professional Portable 65W 35000rpm Electric Nail Drill Strong 90+102 L Handpiece

Product View

Detail

Specification
Item Type: Electric Manicure Drill & Accessory
Material: Stainless Steel
Rotate Speed: 0-35000RPM
Voltage: 110-220V 50~60Hz
Power:65W
Plug:EU/US/UK/AU PLUG
Model : STRONG 90+102L
Output: DC0~32V 0.5A
Fuse：2A(110V) 1A(220V)
Color: As Picture Shown
Handpiece weight:255g
Main Machine Weight:1290g
Main Machine Size: 12.5*9.5*6cm/4.9*3.7*2.4in
 
 
About plug:
This machine standard plug have ： US Plug, Europen Plug.
If you need British(UK) Plug or Australia Plug, we will send you an extra plug.

Product Include
1* Electric Nail Drill Machine
1* Handpiece
1*Foot Switch
1*Handpiece support
1*Box

Features
1.Foot Pedal:
Foot pedal to free your hands.No need to press the Power Switch.Just step on the pedal and the motor will work.
2.Bigger handle :
High precision,long life.Still steady even working in high speed.No vibration and low noise.
3.Potable polisher :
Equipped with fast head-loading mechanism ,good locking effective , high speed .low variations,and safety with low voltage machine .
 
 
4.Power box :
Stable power delivery ,overload protection ,effective converter,foot push , non-polarized speed adjustment.
 
 
5.Stable functioning:
The polishers produced are stable functioning, high speed ,fast polishing , quipped with head lock .
 
 
6.multifunction:
Combination of fast converting polisher and multi-function power box .Carving, Engraving, Routing, Grinding, Sharpening, Sanding, Polishing for Acrylic Nails,Gel Nails,Artificial Nails,Natural Nails,Pets' Nails,not suggest using for something hard.
 
 
7.Application:
Available for using at nail salon,beauty parlor ,spa or personal manicure pedicure,nail art,etc
 
 
8.Practical:
TWIST-LOCK Forward/Reverse direction switch suitable for RIGHT HANDED or LEFT HANDED use, Foot pedal included.
 
 
 
How to Remove and Install the Collet
1.With knurled Chuck Handle in"R"release position and bur or accessory in collet, place triangular hole in Chuck Wrench over triangular flats of Collet head&unscrew the collet counter-clockwise Remove collet.
 
2. With bur or accessory in new collet, thread into handpiece. Place triangular hole in Chuck Wrench over triangular flats of Collet head and tighten the collet clockwise. Be careful not to over-tighten. Test to insure that new collet releases accessory smoothly in the "R" released position. Test to insure that new collet holds firmly in the "S" secure position and spindle rotates freely.
 
 
 
Changing Accessories
Burs and other accessories can be inserted or removed from the handpiece collet when the collet is open. To open the collet:
1. Turn off the motor using the Motor On/Off Switch 3 and the Power Switch.
 
2. Twist the Chuck Handle in the "R" or release direction (clockwise) until the raised indicator bar clicks into the far left mark on the silver center ring.
 
3. Remove the accessory and replace with another accessory. Insert the 'new' accessory shank fully into the collet for maximum support. You should feel it touch the back of the collet.
 
4.Twist the knurled Chuck Handle toward the "S" or secure position by turning counter-clockwise until it snaps to lock the collet. The accessory and the collet will be able to spin freely. The raised collet indicator bar will be above the far right mark in the silver center ring. Note: The intermediate position between "S" and "R" holds both the spindle and the accessory in a locked position. This is useful to unscrew an over-tightened mandrel screw.
 
 
 
 
Safety Instructions
A Micromotor Handpiece is a high speed rotary power tool which can be dangerous and cause serious injury if it is not used properly. NEVER operate it without wearing eye protection.
• ALWAYS wear proper eye and face protection.
• ONLY use accessories rated for 35,000 rpm or higher speeds when operating this micromotor.safe operation when using accessories with head diameters of more than 3/32″ (2mm).
• ALWAYS observe the manufacturer's maximum speed rating when using any accessory.
• NEVER use or continue to use any accessory which appears to be damaged, loose, vibrating, bent, or out of balance. Inspect each accessory for cracks or flaws before use.
• ALWAYS insert the shank or arbor of an accessory or mandrel into the collet or chuck of the handpiece as far as possible in order to provide proper support and close the collet or chuck securely.
• NEVER use excessive side pressures which may tend to bend or break the shank or arbor of an accessory. Let the speed of the accessory do the work.
• DO NOT stall the motor by jamming or using excessive pressure on the mounted point, buff, wheel or accessory. This can result in damage to the motor.
• WEAR a dust protector, mask or respirator to prevent the inhalation of harmful dust or debris from grinding, carving or other operations performed with this power tool.
• NEVER operate with a damaged power cord. If the power cord or plug to the handpiece is damaged, repair or replace immediately.
• USE a dust collector (vacuum system) to pull sawdust, grinding dust, or other debris away from the work area and the micromotor intake vents.
• NEVER turn on or start the Handpiece while chuck is in open (unlocked) position. This can damage the handpiece. Make sure that a bur is installed and secured in the collet, that the spindle is NOT locked and that the bur can spin freely. Always operate and store it with a bur or other accessory in the chuck and with the chuck in the closed position.
• DO NOT operate the handpiece in the presence of any flammable liquid or gas.
 
 
 
Tips:
Turn off the power when using the foot pedal.

We accept PayPal only.

Only ship item to eBay address, so please check or change eBay address when you pay.

Payment must be received within 1-5 days from the date of purchase.

Please leave note in payment when making payment if you have any special request(shipping address/colors/size and so on)

30 days RETURN/ REPLACEMENT

In order to return the order, the items must not used and opened.

Please contact us via eBay message if you have not received item in 30 days,we will check it with post office, and then resend or refund any missing item.
If you have a defective item, you want to return or discount .Please contact us within 2 days from you receive the shipment .All return items must be returned with it’s original packaging and accessories.We will refund the money to you when we get the return items.Or replace item for you.

Working Day: Monday to Friday

Working Time: 9: 00 am to 19: 00 pm (GTM +8: 00 Beijing)

If anything we could help you, please feel free to contact us

Please leave us a positive feedback if you are happy with our services.

We always try our best make sure you have a pleasant experience with your purchases.

If for some reason there is a problem with your order, please let us know so we can work something out for you.

 

DataCaciques