Dayco Fan Clutch 115835 Suits:Ford Ranger / Mazda BT50 2.2 & 3.2Ltr Turbo Diesel 4 & 5 Cyl. Ford Ranger (Sep 2011 on) 2.2L 4 Cyl. 16V DOHC TCDi Turbo Diesel PX 110kW EngCode: P4ATFord Ranger (Sep 2011 on) 3.2L 5 Cyl. 20V DOHC TCDi Turbo Diesel PX 147kW EngCode: P5AT Mazda BT50 (Nov 2011 on) 3.2L 5 Cyl. 20V DOHC TCDi Turbo Diesel 147kW EngCode: P5ATMazda BT50 (Nov 2011 on) 2.2L 4 Cyl. 16V DOHC TCDi Turbo Diesel 110kW EngCode: P4ATDimensions:Overall height: 88mmPilot hole: 20mmFan blade bolt: 83mmOutside diameter: 168 mm Dayco is recognised by both OEMs and the automotive aftermarket as an innovative, technology driven organisation. Dayco Fan Clutches are die-cast aluminium and have a machined body that helps to provide for a tight fit within close tolerances, while producing
RETURNS ACCEPTEDMust be in original condition and packaging
Automotive Filters & parts to suit all vehicles & machinery

Responsive image



Dayco Fan Clutch 115835 for Ford Ranger PX Mazda BT50 2.2L 3.2L Turbo Diesel

$255.00

SKU: 115835

Dayco Fan Clutch 115835 Suits:
Ford Ranger / Mazda BT50 2.2L 3.2L
Turbo Diesel 4Cyl. 5Cyl.

Ford Ranger (Sep 2011 on) 2.2L 4 Cyl. 16V
DOHC TCDi Turbo Diesel PX 110kW EngCode: P4AT
Ford Ranger (Sep 2011 on) 3.2L 5 Cyl. 20V
DOHC TCDi Turbo Diesel PX 147kW EngCode: P5AT

Mazda BT50 (Nov 2011 on) 3.2L 5 Cyl. 20V
DOHC TCDi Turbo Diesel 147kW EngCode: P5AT
Mazda BT50 (Nov 2011 on) 2.2L 4 Cyl. 16V
DOHC TCDi Turbo Diesel 110kW EngCode: P4AT

Dimensions:
Overall height: 88mm
Pilot hole: 20mm
Fan blade bolt: 83mm
Outside diameter: 168 mm

Dayco is recognised by both OEM'S and the automotive aftermarket as an innovative, technology driven organisation. Dayco continues to be guided by the 108 year old primary business strategy to anticipate and satisfy the needs of our customers by providing timely, quality products & services.

On engines with belt-driven cooling fans, a fan clutch is often used to save energy and reduce noise. The fan clutch disengages slows or disengages the engine's cooling fan when extra cooling isn't needed. The fan pulls air through the radiator and air conditioning condenser when the vehicle isn't moving fast enough to provide adequate airflow for cooling. A fan can eat up anywhere from a couple of horsepower up to 12 or 15 hp on a big V8, so by reducing the parasitic horsepower loss on the engine the fan clutch makes a noticeable difference in fuel economy.

Fan Clutch Problems
The fan clutch also reduces noise by slowing down or disengaging the fan at high way speeds, and some even help speed engine warm up during cold weather. A slipping fan clutch is often overlooked as the cause of an engine overheating problem.

As a fan clutch ages, fluid deterioration gradually causes an increase in slippage (about 200 rpm per year). After a number of years of service, the clutch may slip so badly that the fan can't keep up with the cooling needs of the engine and the engine overheats. At this point, replacement is often necessary.

Other signs of fan cluch failure would include any looseness in the clutch (check for fan wobble), or oil streaks radiating outward from the clutch hub. If the clutch is binding, the fan may not release causing excessive cooling and noise, especially at highway speeds.

Checking The Fan Clutch
A good clutch should offer a certain amount of resistance when spun by hand (engine off, of course!). But if the fan spins with little resistance (more than 1 to 1-1/2 turns), the fan clutch is slipping too much and needs to be replaced. If the fan binds, does not turn or offers a lot of resistance, it has seized and also needs to be replaced.

Fan speed can also be checked with an optical tachometer, by marking one of the fan blades with chalk and using a timing light to observe speed changes, and/or listening for changes in fan noise as engine speed changes.

You should also try to wiggle the fan blades by hand. If there is any wobble in the fan, there is a bad bearing in the fan clutch, or a worn bearing on the water pump shaft. A bad water pump bearing will usually cause the water pump to leak and/or make noise, but not always. Remove the fan clutch and see if the play is in the water pump shaft. If it feels tight (no play or wobble), replace the fan clutch.

Dayco Fan Clutches are die-cast aluminium and have a machined body that helps to provide for a tight fit within close tolerances, while producing precision performance. Deep fins increase surface area for improved heat dissipation, while exclusive drive spines are knurled and burnished. The shaft surface resists slippage caused by heavy torque loads and assures longer bearing life.

Top-quality bearings ensure longer life and quiet, smooth running. A special silicone fluid inhibits heat build-up to prolong service life. A bi-metal thermostatic spring adjusts the fan speed in response to operating temperature requirements - reducing fuel consumption.

History
Western Filters has over 30 years experience (est.1981), providing quality filters, automotive parts, aswell as filter cleaning services for both DPF and 'Dry-Type' air cleaner elements. We have expanded our product range over the years and now include a large selection of automotive parts and accessories. Our extensive range of filters suited to many types of SUVs, Four Wheel Drives, Utes, Cars, Machinery, Trucks, Tractors and other machinery. We only stock the best quality brands - at the most competitive prices.

Your engine warranty is safe with Western Filters Air Cleaner Services
Western Filters also cleans dry-type air cleaner elements and have been professionally servicing filters inhouse for over a quarter of a century, that's 25 years. The truth behind our success is that our air filters and Filter Cleaning services are of superior quality due to high level of testing and warranted to be free of defects. 

Services & Product range
If you are requiring a replacement filter, a filter cleaning serive, be it a Diesel Particulate Filter or a conventional air, oil, or fuel filter, Western Filters is here to service your requirements. We have a comprehensive range of quality air, fuel and oil filters, a broad range of motoring products to assist you in maintaining your vehicles performance, safety and value.

Being not only Australia's largest distributor of U.S made Baldwin Filters, we are also one of the largest distributors of other leading brands such as; K&N, Donaldson, Mann, Fleetguard, Parker-Racor, Sakura & Cooper Wesfil automotive filters, just to note a few. In addition to our Air Filter & Cleaning Services, we also sell Silicone Hoses and Clamps, Mirrors and brackets, Lucas Oils, Castrol Oils & Greases, Valvoline Oils, Bando, Dayco and Gates individual belts and hoses, belt and pulley kits, Prixmax Long Life Coolants, Funnels, Drain Pans, Restriction Gauges, Exhaust system components, Septone Truckwash and Degreaser.

 


BUSINESS HOURS | CONTACT INFORMATION

45-47 Forge Street, Blacktown 2148 NSW

Mon-Fri: 7:30am - 5:00pm

Sat: 7:30am - 12:00pm

Shop with Confidence

30 Day Moneyback Guarantee

Goods must be in original condition and packaging.