Dear customer:
Thank you for visit our store,we are proffessional "Business & Industrie" seller for 10 years,our main products included:Sensors,modules devolpment board, LED displays, other IC procuts an so on,any question about DIY robot,Arduino,or Raspberry Pi will be welcome to discuss with us,we will try our best to supply the most advanced product and price,(if we sale more,the cost of made one product will be reduce and we will change or price to make you save more.
Hope you enjoying yourself here!
We appreciate your business!
We will arrange shipping for you within 24 Hours after payment cleared except the holidays.
We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
-We ship items to Worldwide. Thank you!
-we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.
We accept PayPal payment ONLY.
* We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
* If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
* Please include your eBay ID and item number with any email requests.
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "Delivery on time" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
200W 10A CC CV Step Down Buck Converter DC7-32V Module for Battery LED
Module Properties: Non synchronous rectifier,non-isolated buck,constant current& voltage, CC CV charging module.
Input Voltage: 7-32V
Output Voltage: 1.25V - 28V(adjustable)
Output Current: 10A Max, 8A for greater service life.
Output Power: 200W
Working Temperature: -40℃ to +85℃
Working Frequency: 300 KHZ
Tranfer Efficiency: Max 95% (Efficiency is related with input,output voltage,current and voltage difference .)
Constant Current Range: 0.3 to 10A (adjustable)
Turn Lamp Current: Constant current value*(0.1),turn lamp current connect with constant current value ,for example when the constant current is 3A, turn lamp current is set to constant current 0.1 time (0.1*3A=0.3A). When the constant current value is 2A, turm lamp current is set for constant current 0.1 time (0.1*2A=0.2A)
This version is fixed to 0.1 time (+-10%), Direction for charing or full.
Tranfer effciency: Max 95% ( Efficiency is related with input,output voltage ,current and voltage difference.)
Working Frenquency:300KHZ
Output Ripple: Ripple is about 50mV( No noise) 20M bandwidth (For reference only ) input 24V ,output 12V 5A test result.
Working Temperature : Industrial grade(-40℃-+85℃）（Please pay attention to the power tube temperature and strengthen the heatsink system when operating )
No Lload Current: Typical 20mA ( 24V tranfer to 12V)
Load Regulation Rate: ±1%(Constanct voltage)
Voltage Regulation rate: ±1%
The precision of constant current and temperature :Constant current value is less than 5% when the testing temperature from 25 degree up to 60 degree.(Constant current value is 5A)
Dynamic response speed : 5% 200uS
Adjustting direction of potentiometer : Clockwise (increase), anticlockwise(decrease)
Indicator (lamp):Two colors,red is charging while green is full
Output short circuit protection : Yes ,constant current (Constant current value is set up presently)
Input reverse connection protection: No
Output anti-flow-backwards protection : No, you need to add diode for battery.
Connection: Terminal
Module Size: 56 * 65 * 22mm / 2.2*2.55*0.86"
Directions for charging battery:
Make sure you know the floating charge voltage ,charging current and input voltage of your rechangeable battery.
Setting the constant voltage potentiometer,and put the output voltage on about 5V.
Monitor output short circuit current by 10A current of multimeter ,and adjusting output current to the expected charging current by constant current potentiometer.
Adjustting the output voltage to the floating charge voltage by constant voltage potentiometer.
Connecting with the battery and try to charge.
(Step 1.2.3.4 are for module input connected with power,while no load output disconnected with battery.)
Direction for LED constant current driver:
Make sure you know the working current and max working voltage of the LED you need to drive.
Adjusting the constant voltage potentiometer and put output voltage on about 5V.
Mornitor output short circuit current by 10A current of multimeter,and adjusting output current to expected LED working current by constant current.
Adjust the constant voltage potentiometer to LED max working voltage by output voltage potentiometer.
Connecting with LED ,and try to drive.
(Step 1.2.3.4 for module input connected with power,while no load output disconnected with LED max working voltage.)
Package included:
1*200W 10A Adjustable CC CV Step Down Buck Converter DC 7-32V for Battery LED
Am 04.06.19 hat der Verkäufer die folgenden Angaben hinzugefügt: