tile backer board 6mm,10mm,20mm,30mm pack of ten boards 7.2 metres

Tile Backer Boards

6mm, 10mm, 20mm, and 30mm tile backer board 10 sheets

Tile Backer Boards are ideal for underfloor and under tile heating installations below underfloor heating systems on an existing un-insulated concrete or timber sub-floor and will greatly reduce heat up time and running costs.

Tile Backer Boards are ideal for two reasons; an excellent waterproofing surface to fix either wall or floor tiles and excellent heat insulation for underfloor heating systems.

Tile Backer Boards are also suitable for waterproofing wet rooms and showrooms and will protect the floor from absorbing water.

When installing onto concrete sub floors we recommend using flexible tile adhesive, when installing onto wooden floors we recommend using tile adhesive and/or screws and washers.

Sample Pack Includes:

6mm & 10mm Cement Board Sample - approx. 100mm x 150mm each

6mm & 10mm Cement Board Sample - approx. 100mm x 150mm each

6mm Impact Plus Insulation Sample - approx. 150mm x 200mm each

SF / HC / SP & Shower Liner Decoupling Sample - approx. 50mm x 120mm each

Loose Wire UFH Cable Spacer - approx. 160mm in length

1 x Cement Board Washer Disc

You may also require

Living Heat Underfloor Heating Living Heat Underfloor Heating

THINGS TO KNOW ABOUT THIS PRODUCT

Living Heat insulation is manufactured in compliance with BS EN ISO 9001:2001 and certified by BBA Certificate 04/4186. Living Heat insulation also complies with BS EN 13164: 2001 Thermal insulation products for buildings.

All boards come complete with an industry-leading 10-year, waterproof and structural integrity guarantee.

Boards measure (1200mm x 600mm) x 6mm, 10mm 20mm, or 30mm.

Boards can be installed with a suitable adhesive or screwed in position with insulation washers, (both available separately from Living Heat).

Please note when using insulation fixing washers, the washers should be fixed at maximum 300mm centres which mean you will need at least 15 washers per board.

Please feel free to call us if you have any questions or require further assistance. Our time and advice is Free.

Please Note: 6mm Boards are designed for floor only!

For Use With
All types of electric and water under floor heating systems
On top of concrete and timber sub floors
Under all ceramic, porcelain, natural slate and stone floors
For use on walls and floors, ideal for wet rooms
Characteristics Include
High thermal insulation capacity, (blocks out the cold)
Totally inert, (does not degrade with time or external conditions)
Light easy and safe to handle
Easy to cut with sharp knife / fine tooth saw
Resistant to tile cement, building cement and most other building compounds
Water and damp proof
High compression ratio. (minimum 40 tonnes, (yes tonnes!) per m 2)
Environmentally friendly
dimensionally stable, (will not twist or buckle when exposed to moisture of heat)
Excellent sound insulation, (reduces sound reverberation / impact sound)
In Detail
Thermal Conductivity W/mK 0.027 Prevents heat loss
Thermal Resistance sqmK/W 0.85 Blocks out cold
Fire Protection Class Bs 3837 B1 DIN British Standard
Compression strength KPa 25% 400 A minimum of 40 metric tonnes, (yes tonnes!) can be placed on 1 m 2without damage
Water penetration (96 hours) 0.00 Waterproof

Please Note: The structural floor or wall should be suitable for the chosen floor covering eg; tiles or made so before the insulation is fixed in place

IMPORTANT: To make sure you receive the correct sizes if you are unsure of what you require. Please do not hesitate to contact us. If possible, please provide us with a sketch or measurements of the floor area you would like covered. And we will advise you on which product would best suit your requirements.