WELCOME !

INTAKE MANIFOLD SWIRL FLAPS LEVER REPAIR SET FOR:

- FORD / MAZDA / VOLVO - 1.8 2.0 2.3 16V PETROL

NEW !!!

SYMPTOMS:

- Poor response to the accelerator pedal at low speeds (speeds up to 40 km / h).
- Increased fuel consumption.
- Knocking from the intake manifold side.

REASON:

Damage to the lever on the swirl flap actuator arm !!!

Swirl flaps installed in the collector, which are driven by a vacuum actuator connected to the flap lever breaks because part is made of plastic.

Many Mazda / Ford / Volvo car owners after 50,000 km well know this rattling sound from the intake manifold - this is sound of loose swirl flaps.

You can also see increased fuel consumption, the need to delay shifting to a higher gear and worsed drive dynamic at speeds up to 40 km / h.

The reason is the crack in the plastic connector between the actuator and the flap's runner.

The swirl flaps are located in the intake manifold. The vacuum actuator moves the flaps in the intake manifold. The vacuum actuator is attached to a plastic lever and lever to the swirl flap's runner. Lever between the vacuum actuator and the runner wears quickly and sooner or later breaks down because it is made of brittle plastic.

You can only buy the entire intake manifold, because the manufacturer does not sell the levers separately.

Buying a collector is quite expensive and does not make sense if the other elements are intact and work properly.

Some drivers already have sad experiences with attempts to repair the lever by gluing broken parts of the lever. It's not enough. One journey and symptoms are repeated. You can try to find a "used" intake manifold, but there will also be an old plastic lever that will break and the knock on the intake manifold flaps will return.

SOLUTION:

Unfortunately, the original lever can not be bought separately, you can only buy a complete intake manifold assembly, spending a lot of money !!!

The solution is a lever specially made and designed by us, made of the highest quality ALUMINUM alloy, which makes it UNBREAKABLE !!!

It is a reliable and cheap solution !!!

After replacing the lever, the engine intake manifold will start to work evenly. Muffled knocks will disappear. Aluminum is a strong material, so the lever will last a long time.  Modernized in this way intake manifold will function normally again !!!

FITTMENT:

- MAZDA 3 BK BL (03-09)

- MAZDA 5 CR (05-11)

- MAZDA 6 GG GY GH (02-10)

- MAZDA MPV LW (02-06)

- FORD FOCUS MK2 (04-11)

- FORD FOCUS C-MAX (04-11)

- FORD C-MAX (07-11)

- FORD S-MAX WA6 (06-15)

- FORD MONDEO MK3 MK4 (00-14)

- FORD GALAXY MK3 WA6 (06-16)

- VOLVO V50 (04-12)

- VOLVO V70 III (07-12)

- VOLVO C30 (06-13)

- VOLVO C70 (06-13)

- VOLVO S40 II (04-12)

ENGINES: 1.8 / 2.0 / 2.3 PETROL 16V

OE: 1S7G-9L492-CA ; 1S7G9L492CA ; 042578 ; 042796 ; 042797 ; 1S7G-9L492 ;
 1S7G9424DJ ; 1S76-9424-DL ; 4M5G9424FT ; 5164230 ; B4204S4 ;
 4M5G-9424-FT ; 4M5G-9424-FN ; L323-13-100C ; LF ; L8 ; LF17 ; L5 ; L3

SUPER PRICE !!!

(You buy the product presented in the pictures - real photos)


ONLY FOR INTAKE MANIFOLDS LIKE IN THE PHOTO BELOW:

ONLY FOR VACUUM ACTUATORS LIKE IN THE PHOTO BELOW:


BELOW YOU CAN SEE ACTUATOR WITH BROKEN PLASTIC LEVER (LEFT)
 AND FIXED WITH OUR IMPROVED LEVER ( RIGHT):


LOCATION OF THE INTAKE MANIFOLD'S VALVES IN THE INTAKE MANIFOLD:


EASY INSTALLATION !!!
TO FIT THE ITEM JUST PUT IT IN ITS PLACE AND SOFTLY HIT USING HAMMER:


HERE, YOU SEE WHAT YOU ARE BUYING !!!
STORAGE AND SHIPPING LOCATION: J.SLOWACKIEGO 2/409 / 24-100 PULAWY / POLAND