Specification
Less than 0.2 second Response Speed
Less than 0.5 seconds Proximity Time Distance
2-15cm Proximity Range
Support 125khz and 13.56mhz
Built-in Antenna
Built-in LED (Double Color LED)
Built-in Loud Speaker (Buzzer)
DC 12V Working Voltage,70mA Working Current
100 Meters Communication Distance
Real Time Data Transfer
Black Color
PVC Case Material (Black Resin for Water-Proof Function)
76*114mm*16mm
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 12V
Black GND
Green D0
White D1
Blue LED
Yellow Beep
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires
Packing list for RFID Reader
1* RFID Reader
Remind:
1.The package not including any screws .
2.This reader not support NFC cards and tags .
Less than 0.2 second Response Speed
Less than 0.5 seconds Proximity Time Distance
2-15cm Proximity Range
Support 125khz and 13.56mhz
Built-in Antenna
Built-in LED (Double Color LED)
Built-in Loud Speaker (Buzzer)
DC 12V Working Voltage,70mA Working Current
100 Meters Communication Distance
Real Time Data Transfer
Black Color
PVC Case Material (Black Resin for Water-Proof Function)
76*114mm*16mm
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 12V
Black GND
Green D0
White D1
Blue LED
Yellow Beep
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires
Packing list for RFID Reader
1* RFID Reader
Remind:
1.The package not including any screws .
2.This reader not support NFC cards and tags .