Pair of RACING stickers to be affixed to the side of the car, for Peugeot 206, 207, 208, 106, 307 and 308.
The material used is an excellent quality professional film, designed to be applied externally on vehicles, resistant to atmospheric agents such as sun, frost, etc.
The stickers are produced with pre-spaced vinyl without a transparent background, the negative carved parts will take on the color of the body of your car.
How it applies

1. Clean and dry the surface well (it must be smooth)
2. Before application, the transparent film (which is on top of the pre-spaced adhesive) must be adhered to the adhesive itself, by pressing with a soft paddle or a folded cloth over the entire surface of the adhesive.
3. Gently peel off the transparent film and check that all the pre-spaced adhesive has detached from the white paper (which is under the adhesive).
4. Hold the transparent film with the adhesive attached while placing it on the affected surface, spread it then pressing well with a soft paddle or a folded cloth.
5. Once adhered to the surface, remove only the transparent film.
6. The pre-spaced adhesive stays on the surface, so the job is done.
Any edging, jumps or spacing between body elements (eg. doors etc ...) can be profiled by the person carrying out the application, using a simple cutter.

APPLICATION

1 Clean and dry the surface well (should be smooth)
2 Before applying, you have to do to join the better the transparent film (which is above the adhesive pre-spaced) to the adhesive itself, pressing with a shovel or with a soft cloth folded on the whole surface of the adhesive.
3 Gently remove the plastic wrap and check that everything is pre-spaced adhesive is disconnected from the white paper (which is under the sticker).
4 Hold taut plastic wrap with the adhesive attached while placing the area concerned, then spread it with a spatula, pressing down with a soft cloth or folded.
5 Once adhered to the surface only pull away the plastic wrap.
6 The pre-spaced adhesive remains on the surface and the work is finished.
Any eventual discontinuity on the surface of the bodywork (for example doors of the car etc ...) could be refined with a cutter.

Replacement not original
Any logos and trademarks belong to their respective owners
pursuant to Art. 21, paragraph 1 letter C
Legislative Decree 10 February 2005, n.30
industrial property code.