Motenergy ME1306 Brushless DC Permanent Magnet Motor

This three-phase motor requires a motor controller (Sevcon Gen4 or Kelly controllers) that we currently do not offer.

The ME1306 is an Axial Air Gap, Permanent Magnet Synchronous Motor. Rated to be run with battery pack voltage from 24 to 100 VDC. Maximum continuous current rating of 150 amps, peak of 450 amps for 2 minutes. It is an Open Frame, Fan Cooled Motor.

The motor has three hall cells set at 120 electrical degrees for the rotor position feedback. There is an internal Temperature Sensor in the motor windings. Motor weight of 36 pounds.
This motor is a drop-in replacement for the obsolete ME0913 motor. The ME1306 has a larger bi-directional cooling fan and an aluminum fan cover as compared to the original ME0913 motor.
  • Output Power of 12 KW Continuous, 30 KW Peak (at 96 volts)
  • Designed for long life. No brush maintenance. The motor is 92% efficient at voltages between 24 to 96 VDC. Continuous current of 125 amps AC (180 Amps DC into the motor control). This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and 3 Hall sensors at 120 degrees electrical timing. It has two stators with a rotor in the center.
  • This is a 4 pole motor (8 magnets).
  • The Phase to Phase winding resistance is 0.013 Ohms.
  • The maximum recommended rotor speed is 5000 RPM.
  • Voltages from 0 to 96 VDC input to the control.
  • Torque constant of 0.15 Nm per Amp
  • The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
  • Armature Inertia is 45 Kg Cm Squared.
  • Continuous current of 125 Amps AC (180 Amps DC into the motor control).
  • Peak current of 420 Amps AC for 1 minute (600 Amps DC into the motor control).
  • Weight of 35 pounds.
  • Peak Stall Torque of 90 Nm (66 ft-lb).
  • This is an Open Frame, Fan Cooled motor.
  • Timed for counter-clockwise rotation (can be changed to clockwise).

----  --  --  ----  RETURNS  ----  --  --  ----

You must contact us by email for a Return Merchandise Authorization (RMA) number prior to returning an item to the manufacturer or to us. This RMA number must be clearly marked on the label attached to the shipping box. Packages without an RMA number will be refused and returned to the shipper. Warranty items returned with no fault found will be sent back to the customer at the customer’s cost, otherwise, a replacement will be sent. 

----  --  --  ----  REFUNDS  ----  --  --  ----

If you purchased by mistake and would like to return an item for a refund, a 10% restocking fee will apply for uninstalled parts and 30% for parts that have been installed that are tested functional. Shipping costs are non-refundable. 

----  --  --  ----  WARRANTY  ----  --  -- ----

Motors, motor controllers and battery chargers are covered by the manufacturer’s warranty. You can contact us for warranty issues and we will provide information on the return of your product to the manufacturer. All the rest of the products we sell are warranteed free of most defects for a period of 1 year from our customer’s date of purchase unless otherwise specified in the listing. EV Drives will not be liable for any cost of service calls, installation, alleged harm, both personal and materially and/or any other damages resulting from the installation of these parts.