LED Load Resistor Twin Pack 24V 50W 24Ohm
More and more customers are experiencing sporadic warning messages in vehicles when fitting LED lamps due to the reduced current draw of LED’s. A simple solution is to fit a LED Dummy Load Resistor in the circuit to simulate a 21W globe. Aluminium housed wire wound resistors feature stable performance due to their ability to dissipate heat radiation effectively. When mounted to a chassis or metal surface, the heat sink effect is utilised to ensure optimum performance and reliability. Complete environmental protection is achieved using a completely welded construction.
Product features:
- Simulate a 21 Watt globe in the circuit
- Can be used on vehicles with electronic components that are not LED compatible
- Rectifies globe out warning messages by simulating globe load in the circuit
- Rectifies flash rate when using LED indicator lamps
- Rated at 12V or 24V 50 Watt, 12V 6 Ohm or 24V 24 Ohm
- Easy 2 wire installation
- Simply connect between positive and negative feed to LED lamp
- Aluminium housed wire wound resistor for optimum performance and stability
About Outback Equipment
Started by a few mates with a shared passion for 4WDs and all things outdoors – Outback Equipment was built on the ideal of bringing old world service back to online shopping.
No flashy sales tactics, no gimmicky products – just good old-fashioned customer service and honest advice.
We only carry a range of products that we would personally use ourselves, products tried and tested for Australian conditions.
We cater to the broadest range of individuals, from the rookie 4WD and camper just getting started, to the saltiest of you outback veterans.
We help where we can and we are always open to suggestions from you who have been around the block a few times so we may better serve you.
We are 100% Australian owned and operated with our warehouse being located in Brisbane.
Due to recent eBay policy changes we can no longer take calls directly to us. You can however still contact us directory via eBay messages.
Due to recent eBay policy changes we can no longer take calls directly to us. You can however still contact us directory via eBay messages.
Outback Equipment is committed to customer satisfaction. If you are unhappy with any product you receive, simply contact us so we can work with you to resolve the issue as quickly as possible.
Broken or faulty products
If a product is found to be defective, please contact our customer service team as soon as you are made aware of the problem. A repair, replacement, or refund will be organised and will generally occur after consulting with the manufacturer or supplier.
Any repairs that may need to be carried out will be done so by the manufacturer and not by Outback Equipment. If a repair cannot be made, then Outback Equipment will endeavour to have the item replaced or a refund will be offered.
Note: Goods are only warranted for defects in manufacturing. The standard warranty across most products is 12 months unless otherwise specified by the manufacturer.
Change-of-mind or incorrect choice
For any purchases where a change-of-mind occurs or the customer has chosen an incorrect item, the customer has up to 30 days to request an exchange or a store credit. All exchanges, store credits, and refunds will be effected upon return of the item. Any arrangement made prior to the item being returned, will be made at the discretion of Outback Equipment. These items must be returned in their original, undamaged condition.
Note: Online store credits are only applicable for purchases made through our webstore.
Return shipping
If a product is deemed faulty and is required to be returned, Outback Equipment will provide a Postage Paid label. This only applies to claims made within 60 days from purchase. Any claims made outside this period will be considered a warranty claim and postage will therefore need to be incurred by the customer.
For any change-of-mind or incorrectly chosen purchases that need to be returned, the cost of return postage will be incurred by the customer.
Our return address is:
Outback Equipment
1 Murdoch Cct
Acacia Ridge
Qld, 4110
Please contact Outback Equipment before returning any items.
Fitment or Assembly of Goods
For goods that require fitment or assembly our return policy cannot extend beyond the value/cost of the item ordered. This is in large part because the performance of these items is dependent on correct fitment, assembly, and operation. The part must only be fitted by a qualified person. Failure to comply with manufacturer’s specifications may result in property damage, severe injury, or death.
Goods should also be carefully inspected for marks, scratches, or any damage prior to installation. No warranty claims of this nature will be accepted once fitted.
At Outback Equipment, we value ease and convenience when it comes to online shopping. This is why we have provided the following answers to the questions most frequently asked by our customers.
If you cannot find the answer you are looking for, please feel free to contact us via eBay and we will get back to you as quickly as possible between the hours of 8.00am and 4.30pm Monday to Friday.
My order arrived damaged – what should I do?
If one or more of your items has been broken in transit, please contact us by messaging our eBay store to arrange a return.
I have received the wrong product – what should I do?
Please send us a message as soon as possible detailing the eorror and our friendly customer service team will work hard to resolve the issue.
My order never arrived – what should I do?
If your order never arrives or has gotten lost in transit, please contact us through eBay as soon as possible.
I wish to return an item – how do I do this?
Please refer to our returns policy for details on how to return an item.
