PART NUMBER CAM2
HERE WE HAVE A BERLT RACING PERFORMANCE CAM SHAFT FOR A TL125 fits 1975 to 1979 two piece head
Also fits RS200 HONDA TRIALS
34mm front bearing 22mm rear bearing 122mm long
31.00 MM EXAUST LIFT
31.80 MM INLET LIFT
LONGER DURATION AND GOOD OVERLAP
WE HAVE DEVELOPED THIS CAMSHAFT WITH TRIALS IN MIND WE HAVE MADE INCREASES IN ALL AREAS MORE TORQUE WHICH GIVES YOU BETTER OF THE BOTTOM POWER ,OVERLAPED CAM LOBES GIVING YOU LONGER DURATION
RESULTING IN GOOD MIDRANGE POWER AND SLIGHTLY HIGHER LIFT ON INLET
AND EXHAUST LOBES INSURING BETTER TOP END REVS MAKES BIKE REV OUT
IF YOU NEED IT.
NOTHING TO DO BUT FIT NO CARB OR VALVE MODS NEEDED EITHER
JUST FIT, LOVE THE DIFFERENCE AND WIN
MADE IN JAPAN
WE DO 5 TYPES OF HONDA CAM SPECS BELLOW
HONDA PERFORMANCE HIGH LIFT CAMS IN STOCK
HONDA PERFORMANCE HIGH LIFT CAMS IN STOCK
CAM1 first one made made
1971 to 1975 SL/ TL /XL CAMS EARLY ONE PIECE CYLINDER HEAD KIT 20MM BACK BUSH 30MM FRONT BUSH 125MM LONG. (No back bush runs in head )
Oe part number 14101-365-00
INLET LIFT (lobe thickness ) 31.44mm
EXHAUST LIFT (lobe thickness) 31.14mm
IMPROVED OVER LAP
Duration , longer for better bhp and torque
CAM2 Second one made (THIS LISTING )
TL125 XL125 2 PIECE HEAD APROX 1975 TO 1979
Replaces 22810-166-000 camshaft for CB125S 1976-80, XL125S 1976-78
Replaces 14101-383-000
22 MM REAR BUSH 34MM FRONT BUSH 122MM LONG ( No back bush runs in head )
122.5mm Long inc advance retard extension
INLET LIFT. 31.80mm
EXHAUST LIFT. 31.00mm
IMPROVED OVER LAP DURATION
CAM3 Third one made
1979 TO 1985 TL/XL 125S AND 185S 200 20MM BACK BUSH 34MM FRNT BUSH 130MM LONG ( Back bush fitted with dowl ID 20mm OD 28MM)
INLET LIFT
EXHAUST LIFT
IMPROVED OVER LAP DURATION
CAM4 Fourth one made
1985 TO 1989 TLR200 TLR250 XR200 22MM REAR BUSH 34MM FRONT BUSH 92.50 LONG. (REAR BUSH FITTED WITH DOWL ID 20MM OD 28MM )
INLET LIFT
EXHAUST LIFT
IMPROVED OVER LAP DURATION
CAM5 Fifth one made
1989 onwards bearings cam 20 ID REAR BUSH FITTED 28MM OD FRONT ROLLER NEEDLE BEARING 40MM OD 92.50MM LONG
XLR /TLR WITH OVER BORE TO FRONT BEARING HOUSING
INLET LIFT
EXHAUST LIFT
IMPROVED OVER LAP DURATION
CAM6 SIXTH ONE MADE
20 ID REAR BUSH FITTED 28MM OD FRONT ROLLER NEEDLE BEARING 40MM OD 122.5mm LONG inc advance & retard extension XL/TL/CB WITH OVER BORE TO FRONT BEARING HOUSING INLET LIFT 31.83mm EXHAUST LIFT 31.45mm IMPROVED OVER LAP DURATION
YOU ARE BUYING FROM A BRITSH COMPANY BERLT UK
WE HAVE HAD A TLR200 CAM FITTED IN A CHROME FRAME SHERCO/TLR ENGINED BIKE SINCE 2004 AND MY SON MICHAEL LEE HAS WON MANY EXPERT EVENTS ON IT
SEE PHOTOS taken 2009 still got the bike
We also do a PERFORMANCE CAM FOR A TLR200 TRIALS
Item you will recive Includes high performance BERLT. Profile ground camshaft.
HIGHLIFT / LONG DURATION for best performance
good smoth power Without sacrificing reliability
Spec
Inlet Height. Higher
Exhaust Higher
Duration longer
IMPORTANT BERLT BIGBORE KITS ARE FOR COMPETITION USE ONLY
TRACK DAYS / DIRT RACING/ CLOSED CIRCUIT RACING ONLY
NOT SUITABLE FOR ROAD USE